Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Other Properties
Value | Units | Test Method / Conditions | |
Tensile Stress at Break at 23°C | 70 | MPa | ISO 527-1/2 |
Tensile Stress at Break (23°C, 5mm/min) | 70 | MPa | ISO 527-1/2 |
Tensile Strain at Break at 23°C (1 mm/min) | 3.5 | % | ISO 527-1/2 |
Tensile Strain at Break (23°C, 1mm/min) | 3.5 | % | ISO 527-1/2 |
Tensile Elastic modulus 23°C (1 mm/min) | 6400 | MPa | ISO 527-1/2 |
Tensile Elastic Modulus (23°C, 1mm/min) | 6400 | MPa | ISO 527-1/2 |
FLEXURAL Elastic Modulus | 5500 | MPa | ISO 178 |
Flexural Elastic Modulus | 5500 | MPa | ISO 178 |
Izod Impact Strength Unnotched at 23°C | 15 | kJ/m2 | ISO 180/1U |
Izod Impact Strength Unnotched (23°C) | 15 | kJ/m2 | ISO 180/1U |
Izod Impact Strength Notched at 23°C | 5.5 | kJ/m2 | ISO 180/1A |
Izod Impact Strength Notched (23°C) | 5.5 | kJ/m2 | ISO 180/1A |
Value | Units | Test Method / Conditions | |
Density at 23°C | 1.16 | g/cm3 | ISO 1183 |
Density (23°C) | 1.16 | g/cm3 | ISO 1183 |
Melt Volume Flow Rate - MVR at 220°C, 10 kg) | 8 | cm3/10min | ISO 1183 |
Melt Volume Flow Rate (220°C, 10 kg) | 8 | cm3/10min | ISO 1183 |
Drying Temperature | 80 | °C | — |
Drying Time | 4 | h | — |
Melt Temperature | 220 - 260 | °C | — |
Mould Temperature | 50 - 90 | °C | — |
Value | Units | Test Method / Conditions | |
VICAT Softening Point (50 N, 50°C/h) | 95 | °C | ISO 306/B |
VICAT Softening Point (50N, 50°C/h) | 95 | °C | ISO 306/B |
Value | Units | Test Method / Conditions | |
Burning Behaviour (1.6 mm) | HB | — | — |
Regulatory & Compliance
- Certifications & Compliance