Nevimid 66 A FC20 NATURALE

Identification & Functionality

Chemical Family

Polyamides

Fillers Included

Carbon Fiber

Polymer Name

Polyamide 66 (PA 66)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Materials Features

Chemical Resistant,

Excellent Mechanical Strength,

Thermal Shock Resistant

Applications & Uses

Markets

Agriculture & Feed,

Automotive & Transportation,

Consumer Goods

Applications

Agriculture & Feed — Agricultural Films

Greenhouse & Tunnel Films,

Mulch & Fumigation Films,

Other Agricultural Films,

Silage & Stretch Films

Automotive & Transportation — Automotive

Exterior & Body,

Interior,

Other Automotive Applications

Consumer Goods — Other Consumer Goods Applications

Plastics & Elastomers End Uses

Agricultural Applications,

Automotive Applications,

Automotive Exterior Parts,

Automotive Interior Parts,

Consumer Applications,

Greenhouse Film,

Mulch Film

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress at Break at 23°C	220	MPa	ISO 527-1/2
Tensile Stress at Break (23°C, 5mm/min)	220	MPa	ISO 527-1/2
Tensile Strain at Break at 23°C	4.5	%	ISO 527-1/2
Tensile Strain at Break (23°C, 5mm/min)	4.5	%	ISO 527-1/2
Tensile Elastic modulus 23°C (1 mm/min)	16000	MPa	ISO 527-1/2
Tensile Elastic Modulus (23°C, 1mm/min)	16000	MPa	ISO 527-1/2
Izod Impact Strength Unnotched at 23°C	50	kJ/m2	ISO 180/1U
Izod Impact Strength Unnotched (23°C)	50	kJ/m2	ISO 180/1U
Izod Impact Strength Notched at 23°C	10	kJ/m2	ISO 180/1A
Izod Impact Strength Notched (23°C)	10	kJ/m2	ISO 180/1A

Typical Properties

	Value	Units	Test Method / Conditions
Density at 23°C	1.21	g/cm3	ISO 1183
Density (23°C)	1.21	g/cm3	ISO 1183
Shrinkage - Parallel (115mm x 50mm x 3mm)	0.1 – 0.3	%	Internal
Shrinkage - Parallel (115mm x 50mm x 3mm)	0.1 - 0.3	%	Internal
Shrinkage - Normal (115mm x 50mm x 3mm)	0.2 – 0.5	%	Internal
Shrinkage - Normal (115mm x 50mm x 3mm)	0.2 - 0.5	%	Internal
Drying Temperature	80	°C	—
Drying Time	4	h	—
Melt Temperature	270 - 290	°C	—
Mould Temperature	80 - 100	°C	—

Thermal Properties

	Value	Units	Test Method / Conditions
VICAT Softening Point (50 N - 50°C/h)	260	°C	ISO 306/B
VICAT Softening Point (50N, 50°C/h)	260	°C	ISO 306/B
Heat Deflection Temperature (1,80 MPa - 120°C/h)	255	°C	ISO 75-1/-2
Heat Deflection Temperature (1.80 MPa, 120°C/h)	255	°C	ISO 75-1/-2

Other Properties

	Value	Units	Test Method / Conditions
Burning Behaviour	HB	—	UL94

Regulatory & Compliance

Certifications & Compliance

UL 94