Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
Value | Units | Test Method / Conditions | |
Tensile Stress at yield at 23°C (5 mm/min) | 90 | MPa | ISO 527-1/2 |
Tensile Stress at yield (23°C, 5mm/min) | 90 | MPa | ISO 527-1/2 |
Tensile Strain at Break at 23°C | 50 | % | ISO 527-1/2 |
Tensile Strain at Break (23°C, 5mm/min) | 50 | % | ISO 527-1/2 |
Tensile Elastic modulus 23°C (1 mm/min) | 3600 | MPa | ISO 527-1/2 |
Tensile Elastic Modulus (23°C, 1mm/min) | 3600 | MPa | ISO 527-1/2 |
Flexural Maximum Load at 23°C (2 Mm/Min) | 135 | MPa | ISO 178 |
Flexural Modulus at 23°C | 3200 | MPa | ISO 178 |
Flexural Modulus (23°C, 2mm/min) | 3200 | MPa | ISO 178 |
Izod Impact Strength Notched at 23°C (80 x 10 x 4.0 mm) | 5 | kJ/m2 | ISO 180/1A |
Izod Impact Strength Notched (23°C, 80 x 10 x 4.0 mm) | 5 | kJ/m2 | ISO 180/1A |
Value | Units | Test Method / Conditions | |
Density at 23°C | 1,14 | g/cm3 | ISO 1183 |
Density (23°C) | 1.14 | g/cm3 | ISO 1183 |
Shrinkage - Parallel (115mm x 50mm x 3mm) | 1,6 - 2,0 | % | Internal |
Shrinkage - Parallel (115mm x 50mm x 3mm) | 1.6 - 2.0 | % | Internal |
Shrinkage - Normal (115mm x 50mm x 3mm) | 1,6 - 2,0 | % | Internal |
Shrinkage - Normal (115mm x 50mm x 3mm) | 1.6 - 2.0 | % | Internal |
Drying Temperature | 80 | °C | — |
Melt Temperature | 260 - 290 | °C | — |
Mould Temperature | 60-80 | °C | — |
Value | Units | Test Method / Conditions | |
VICAT Softening Point (10 N - 50°C/h) | 240 | °C | ISO 306/A |
VICAT Softening Point (10N, 50°C/h) | 240 | °C | ISO 306/A |
Heat Deflection Temperature (0,45 MPa - 120°C/h) | 90 | °C | ISO 75-1/-2 |
Heat Deflection Temperature (0.45 MPa, 120°C/h) | 90 | °C | ISO 75-1/-2 |
Regulatory & Compliance
- Certifications & Compliance