Neviprop 040 TL40 NERO

Identification & Functionality

Chemical Family

Polyolefins,

Polypropylenes (PP)

Fillers Included

Talc

Polymer Name

Polypropylene Homopolymer (HPP)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Materials Features

Chemical Resistant,

Excellent Mechanical Strength

Applications & Uses

Markets

Agriculture & Feed,

Automotive & Transportation,

Consumer Goods

Applications

Agriculture & Feed — Agricultural Films

Greenhouse & Tunnel Films,

Mulch & Fumigation Films,

Other Agricultural Films,

Silage & Stretch Films

Automotive & Transportation — Automotive

Exterior & Body,

Interior,

Other Automotive Applications

Consumer Goods — Other Consumer Goods Applications

Plastics & Elastomers End Uses

Agricultural Applications,

Automotive Applications,

Automotive Exterior Parts,

Automotive Interior Parts,

Consumer Applications,

Greenhouse Film,

Mulch Film

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress at yield at 23°C (5 mm/min)	30	MPa	ISO 527-1/2
Tensile Stress at yield (23°C, 50mm/min)	30	MPa	ISO 527-1/2
Tensile Strain at Break at 23°C	20	%	ISO 527-1/2
Tensile Strain at Break (23°C, 50mm/min)	20	%	ISO 527-1/2
Tensile Elastic modulus 23°C (1 mm/min)	3700	MPa	ISO 527-1/2
Tensile Elastic Modulus (23°C, 1mm/min)	3700	MPa	ISO 527-1/2
Flexural Modulus at 23°C	3800	MPa	ISO 178
Flexural Modulus (23°C, 2mm/min)	3800	MPa	ISO 178
Izod Impact Strength Unnotched at 23°C	3	kJ/m2	ISO 180/1U
Izod Impact Strength Unnotched (23°C)	3	kJ/m2	ISO 180/1U
Izod Impact Strength Notched at 23°C	12	kJ/m2	ISO 180/1A
Izod Impact Strength Notched (23°C)	12	kJ/m2	ISO 180/1A

Typical Properties

	Value	Units	Test Method / Conditions
Density at 23°C	1,25	g/cm3	ISO 1183
Density (23°C)	1.25	g/cm3	ISO 1183
Melt Volume Flow Rate - MVR at 190°C-2,16kg	10	cm3/10min	ISO 1133
Melt Flow Index (190°C, 2.16 kg)	10	cm3/10min	ISO 1133
Shrinkage - Parallel (115mm x 50mm x 3mm)	0,7 - 0,9	%	Internal
Shrinkage - Parallel (115mm x 50mm x 3mm)	0.7 - 0.9	%	Internal
Shrinkage - Normal (115mm x 50mm x 3mm)	0,7 - 0,9	%	Internal
Shrinkage - Normal (115mm x 50mm x 3mm)	0.7 - 0.9	%	Internal
Drying Temperature	70	°C	—
Melt Temperature	190 - 220	°C	—
Mould Temperature	50 - 80	°C	—

Thermal Properties

	Value	Units	Test Method / Conditions
VICAT Softening Point (50 N - 50°C/h)	120	°C	ISO 306/B
VICAT Softening Point (50N, 50°C/h)	120	°C	ISO 306/B
Heat Deflection Temperature (1,80 MPa - 120°C/h)	85	°C	ISO 75-1/-2
Heat Deflection Temperature (1.80 MPa, 120°C/h)	85	°C	ISO 75-1/-2

Other Properties

	Value	Units	Test Method / Conditions
Burning Behaviour	HB	—	UL94

Regulatory & Compliance

Certifications & Compliance

UL 94