Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Additional Development Options
Colors : xPEEK147 formula can be made in additional pigment colors.
Formula Modification for xPEEK147 are possible.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Post Processing
xPEEK147 requires post processing to achieve specified properties. Prior to post curing, support structures should be removed from the printed part, and the part should be washed in a compatible cleaner. Nexa3D recommends either IPA or Nexa3D's xClean in 2 minute wash intervals. Use compressed air to remove residual solvent from the surface of the material between intervals.
- Post Curing
xPEEK147 requires post curing to achieve specified properties. A wide array of post cure equipment can be used to cure appropriately.
Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Note
All specimen are printed unless otherwise noted. All specimen were conditioned in ambient lab conditions at 19-23C / 40-60% RH for at least 24 hours. ASTM Methods: D638 Type IV, 5mm/min, D790-B, 2mm/min, D256 Notched IZOD (Machine Notched), 6 mm x 12 mm, D648, D2240, Type “D” (0, 3 seconds), D570 0.125” x 2” Disk 24hr@ 25°C, D7867@ 25°C (77°F), D1475
* Based on data provided by Henkel.
1. TaskID Reference: FOR2424542
2. TaskID Reference: FOR6308
3. TaskID Reference: FOR8167
4. TaskID Reference: FOR6307
5. TaskID Reference: FOR5687
6. TaskID Reference: FOR5769
7. TaskID Reference: FOR8159
8. TaskID Reference: FOR8160
9. TaskID Reference: FOR5454
10. TaskID Reference: FOR5646
11. TaskID Reference: FOR20535
12. TaskID Reference: FOR4007
13. TaskID Reference: FOR8157
14. TaskID Reference: FOR8158
15. TaskID Reference: FOR8163
16. TaskID Reference: FOR12288
17. TaskID Reference: FOR8169
18. TaskID Reference: FOR8168
19. TaskID Reference: FOR24543
20. TaskID Reference: FOR19475
21. TaskID Reference: FOR19476
22. TaskID Reference: FOR19477
23. TaskID Reference: FOR24545
24. TaskID Reference: FOR19479
25. TaskID Reference: FOR6491
26. TaskID Reference: FOR20374
27. TaskID Reference: FOR24356
| Value | Units | Test Method / Conditions | |
| Tensile Stress at Break (Green)³ | 29.1 - 32.3 | MPa | ASTM D638 |
| Young’s Modulus (Green)³ | 1013 - 1287 | MPa | ASTM D638 |
| Elongation at Failure (Green)³ | 4.2 - 7.6 | % | ASTM D638 |
| Flexural Stress at Yield (Green)¹² | 65 - 71 | MPa | ASTM D790 |
| Flexural Modulus (Green)¹² | 1864 - 2242 | MPa | ASTM D790 |
| Flexural Strain at Break (Green)¹² | 4.9 - 10.3 | % | ASTM D790 |
| Tensile Stress at Break⁵ | 73 - 77 | MPa | ASTM D638 |
| Young’s Modulus⁵ | 3157 - 3227 | MPa | ASTM D638 |
| Elongation at Failure⁵ | 2.9 - 3.1 | % | ASTM D638 |
| Flexural Stress at Yield¹ | 111 - 145 | MPa | ASTM D790 |
| Flexural Modulus¹ | 3133 - 3201 | MPa | ASTM D790 |
| Flexural Strain at Break¹ | 3.72 - 5.32 | % | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Solid Density (Green)²⁴ | 1.246 | g/cm³ | ASTM D792 |
| Shrinkage by Density (Green)²⁴ | 8.25 | % | ASTM D792 |
| Viscosity (25°C, Green)¹¹ | 1905 - 2305 | cP | ASTM D7867 |
| Liquid Density (Green)¹⁵ | 1.15 | g/mL | ASTM D1475 |
| Durometer (0 Sec)⁸ | 94 | Shore D | ASTM D2240 |
| IZOD Impact Strength¹³ | 14.6 | J/m | ASTM D256 |
| Water Absorption (24 Hr)¹⁶ | 0.25 | % | ASTM D570 |
| Solid Density²⁴ | 1.262 | g/cm³ | ASTM D792 |
| Shrinkage by Density²⁴ | 9.64 | % | ASTM D792 |
| Value | Units | Test Method / Conditions | |
| HDT (at 0.455 MPa, Vicat)¹⁹ | 238 | °C | ASTM D648 |
| HDT (at 1.82 MPa, Vicat)²³ | 107 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (25 - 200°C)¹⁷ | 114 | μm/m-°C | ASTM E831 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Technical Details & Test Data
- Environmental Resistance
Heat Aging
Aged at 125°C and tested at 22°C
** Based on data provided by Henkel.