Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Post Processing
xPP405-Clear requires post processing to achieve specified properties.
- Post Curing
xPP405-Clear requires post curing to achieve specified properties.
- Post Processing Options
- Color/Dying - Laboratory testing shows that dying xPP405-Clear using solvent solutions is possible. In order to maintain mechanical properties we recommend dying after post cure is completed. Dyeing prior to post cure, results may vary and effect mechanical properties.
- Polishing / Coating is needed for optimum clarity to be obtained. For more information please contact your Henkel representa-tive.
Properties
- Color
- Mechanical Properties
- Note
All specimen are printed unless otherwise noted. All specimen were conditioned in ambient lab conditions at 19-23C / 40-60% RH for at least 24 hours. ASTM Methods: D638 Type IV, 50mm/min, D790-B, 2mm/min, D256 Notched IZOD (Machine Notched), 6 mm x 12 mm, D648, D2240, Type “D” (0, 3 seconds), D1475, D7867 *Based on data provided by Henkel. This information is representative only. Contact your Nexa3D Technical Service Team for furtherinformation.
1) TaskID Reference: FOR16318
2) TaskID Reference: FOR21593
3) TaskID Reference: FOR5556
4) TaskID Reference: FOR9594
5) TaskID Reference: FOR16316
6) TaskID Reference: FOR24538
7) TaskID Reference: FOR10162
8) TaskID Reference: FOR16266
9) TaskID Reference: FOR16274
10) TaskID Reference: FOR18476
11) TaskID Reference: FOR16322
12) TaskID Reference: FOR17633
13) TaskID Reference: FOR18202
14) TaskID Reference: FOR18207
15) TaskID Reference: FOR18206
16) TaskID Reference: FOR18829
17) TaskID Reference: FOR18201
18) TaskID Reference: FOR18611
19) TaskID Reference: FOR18208
20) TaskID Reference: FOR18531
21) TaskID Reference: FOR19711
22) TaskID Reference: FOR20002
| Value | Units | Test Method / Conditions | |
| Tensile Stress at Break (Green)²¹ | 27 - 33 | MPa | ASTM D638 |
| Tensile Stress at Yield (Green)²¹ | 17 - 19 | MPa | ASTM D638 |
| Young’s Modulus (Green)²¹ | 767 - 819 | MPa | ASTM D638 |
| Elongation at Failure (Green)²¹ | 116 - 134 | % | ASTM D638 |
| Tensile Stress at Break (Post Processed)² | 31 - 39 | MPa | ASTM D638 |
| Tensile Stress at Yield (Post Processed)² | 37 - 39 | MPa | ASTM D638 |
| Young’s Modulus (Post Processed)² | 1277 - 1323 | MPa | ASTM D638 |
| Elongation at Failure (Post Processed)² | 82 - 118 | % | ASTM D638 |
| Maximum Flexural Stress(Post Processed)¹ | 43 - 47 | MPa | ASTM D790 |
| Flexural Modulus (Post Processed)¹ | 1224 - 1376 | MPa | ASTM D790 |
| Flexural Strain at Break (Post Processed)¹ | Does not break | — | ASTM D790 |
| Impact Strength - IZOD Notched (Post Processed)⁶ | 62.27 - 68.27 | J/m | ASTM D256 |
| Impact Strength - IZOD Unnotched (Post Processed)⁶ | min. 1500 | J/m | ASTM D256 |
| HDT (at 0.455 MPa, Post Processed)¹⁶ | 53 | °C | ASTM D648 |
| Hardness (0s, Post Processed)¹⁰ | 79 | Shore D | ASTM D2240 |
| Water Absorption (Post Processed)¹¹ | 2 | % | ASTM D570-98 |
| Liquid Density (Post Processed)¹² | 1.05 | — | ASTM D1475 |
| Solid Density (Green)¹² | 1.126 | g/cm³ | ASTM D1475 |
| Solid Density (Post Processed)¹² | 1.134 | — | ASTM D1475 |
| Viscosity (25°C, Post Processed)⁵ | 2300 | cP | ASTM D7867 |
| Hardness (3s, Post Processed)¹⁰ | 76 | Shore D | ASTM D2240 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Biocompatibility
Basic Biocompatibility. Passed ISO10993-5 and classified as Non-Irritant in -23
Technical Details & Test Data
- Test Data
Clear Color Properties **
Method: ASTM E308, Total Transmission Part State L* a* b* C* h dE Green / no post-processing [17] 92.425 -1.205 2.195 2.5 118.735 NA Dymax 5000EC 10 minutes / side [17] 92.255 -0.52 1.265 1.37 112.28 1.17 Loctite CL36 30min/side [18] 92.18 -0.32 0.89 0.94 109.88 1.831366
QUV exterior weathering conditions (ASTM G-154 - Cycle 1): Clear color **Method: ASTM G-154 - Cycle 1 & ASTM E308, Total Transmission QUV Exposure Time (Hrs) L* a* b* C* h dE 0 90.86 -0.65 1.03 1.22 122.49 NA 240 91.06 -0.47 1.42 1.49 108.47 0.47 QUV exterior weathering conditions (ASTM G-154 - Cycle 1): Clear color mechanical properties **
Method: ASTM G-154 - Cycle 1 FOR16324 5mm/min QUV Exposure Time (Hrs) Tensile Stress at break (MPa) Yield Stress (MPa) Young’s Modulus (MPa) Elongation at break (%)
0 49 ± 3 42 ± 1 1412 ± 60 116 ± 12 300 41 ± 3 40 ± 1 1343 ± 103 78 ± 12 520 41 ± 2 44 ± 1 1469 ± 35 63 ± 16 800 38 ± 1 45 ± 1 1478 ± 51 46 ± 16 Method: ASTM G-154 - Cycle 1 FOR19972 5mm/min current QUV Exposure Time (Hrs) Tensile Stress at break (MPa) Yield Stress (MPa) Young’s Modulus (MPa) Elongation at break (%)
0 40±2 34±1 1260±34 118±12 325 35±2 36±1 1469±11 80±14 650 34±1 39±1 1510±32 68±7 975 30±2 37±1 1500±10 50±9 ** Based on data provided by Henkel.