Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Product Highlights
Post Processing
Nexa3D xPRO410 requires post processing to achieve specified properties.
Post Curing
Nexa3D xPRO410 requires post curing to achieve specified properties.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Typical Properties
- Note
All specimen are printed unless otherwise noted. All specimen were conditioned in ambient lab conditions at 19-23C / 40-60% RH for at least 24 hours." ASTM Methods: D638 Type V, 10mm/min.D256 Notched IZOD (Machine Notched), D648; D2240, Type “D” (0, 3 seconds)
* Based on testing carried out by Henkel. This information is representative only.1. Task FOR20868
2. Task FOR20350
3. Task FOR20930
4. Task FOR20317
5. Task FOR21384
6. Task FOR21754
7. Task FOR20352
8. Task FOR20878
9. Task FOR 21415
10. Task FOR21413
11. Task FOR21416
12. Task FOR17012
13. Task FOR20921 FOR22780 FOR20117
Value | Units | Test Method / Conditions | |
Tensile Strength at Break (Green)¹ | 20.71 | MPa | ASTM D638 |
Young’s Modulus (Green)¹ | 796 | MPa | ASTM D638 |
Elongation at Failure (Green)¹ | 14.05 | % | ASTM D638 |
Tensile Strength at Break (LED 405nm Post Cured)² | 41.6 | MPa | ASTM D638 |
Young’s Modulus (LED 405nm Post Cured)² | 2365 | MPa | ASTM D638 |
Elongation at Failure (LED 405nm Post Cured)² | 5.46 | % | ASTM D638 |
Value | Units | Test Method / Conditions | |
HDT (at 0.455 MPa, Green)⁶ | 53 | °C | — |
Durometer Hardness (Green)⁹ | 69 | Shore D | — |
Dimensional Stability (Green - Post cure) | 0.28 | — | — |
IZOD Impact Strength (Notched, LED 405nm Post Cured)⁴ | 25 | J/m | — |
HDT (at 0.455 MPa, LED 405nm Post Cured)⁷ | 61 | °C | — |
Durometer Hardness (LED 405nm Post Cured)¹⁰ | 79 | Shore D | — |
Viscosity (25°C)¹² | 400 - 600 | cP | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Biocompatibility
Safe to Touch. Classified as non-irritant in -23.