Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
Good strength & wear resistance.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Product Applications
It is an ideal for Automotive application.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %.- Post Molding Recommendations
Molded components should be conditioned in water at a min of 95 deg C until they absorb 0.8-1.2 % of water above their original weight.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
- Injection Molding
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 60.0 | MPa | ASTM D-638 |
| Tensile Modulus | 6000.0 | MPa | ASTM D-638 |
| Elongation at Break | 5.0 | % | ASTM D-638 |
| Flexural Strength | 120.0 | MPa | ASTM D-790 |
| Flexural Modulus | 5500.0 | MPa | ASTM D-790 |
| Izod Notched Impact Strength(23°C) | 9.0 | Kg-cm/cm | ASTM D-256 A |
| Rockwell Hardness | 110.0 | R Scale | ASTM D-785 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature @18.5Kg/Sq Cm Load | 108.0 | °C | ASTM D-648 |
| Heat Deflection Temperature (4.5Kg/Sq Cm Load) | 115.0 | °C | ASTM D-648 |
| Melting Point | 105.0 | °C | ASTM D-2117 |
| Flammability UL 94(Thickness 0.8mm) | H.B. | - | ISO1210/UL-94 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength | 18.0 | KV / mm | IEC 60243 |
| Comparative Tracking Index | min. 400 | Volts | IEC60112 |
| Volume Resistivity | 1.0e+16 | Ohms – m | IEC 60093 |
| Surface Resistivity | 1.0e+17 | Ohms | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.17 | - | ASTM D-792 |
| Filler Content | 15.0 | % | ASTMD-5630 |
| Water Absorption(Saturation. immersed) | 0.6 | % | ASTM D-570 |
| Water Absorption (23°C , 24 Hrs) | 0.13 | % | ASTM D-570 |
| Value | Units | Test Method / Conditions | |
| Feed Zone | 210 - 215 | °C | - |
| Compression Zone | 215 - 220 | °C | - |
| Mixing Zone | 220 - 230 | °C | - |
| Mould Temperatures | 45 - 75 | °C | - |
| Value | Units | Test Method / Conditions | |
| MFI | 10.0 | Gm/10min. | ASTMD-1238 |
| Mold Shrinkage(Parallel) | 0.2 | % | ASTMD-955 |
| Mold Shrinkage(Normal) | 0.2 | % | ASTMD-955 |
Regulatory & Compliance
- Certifications & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC Unless specified, this grade is not suitable for food contact, medical devices or toy applications