Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
Good Thermal resistance ,Execellent dimensional stability and High strength
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
This product was developed for the application on parts where good mechanical property ,superficial aspect and dimensional stability are required.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %.- Post Molding Recommendations
Molded components should be conditioned in water at a min of 95 deg C until they absorb 0.8-1.2 % of water above their original weight.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
- Injection Molding
- Rheological Properties
Value | Units | Test Method / Conditions | |
Tensile Strength | 190.0 | MPa | ASTM D-638 |
Flexural Modulus | 11000.0 | MPa | ASTM D-790 |
Izod Notched Impact Strength(23°C) | 17.0 | Kg-cm/cm | ASTM D-256 A |
Elongation at Break | 4.0 | % | ASTM D-638 |
Flexural Strength | 250.0 | MPa | ASTM D-790 |
Rockwell Hardness | 115.0 | M Scale | ASTM D-785 |
Rockwell Hardness | 125.0 | R Scale | ASTM D-785 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (18.5Kg/Sq Cm Load) | 220.0 | °C | ASTM D-648 |
Heat Deflection Temperature (4.5Kg/Sq Cm Load) | H.B. | - | ASTM D-648 |
Flammability UL 94(Thickness 0.8mm) | 210.0 | °C | ASTM D-2117 |
Melting Point | 220.0 | °C | ISO1210/UL-94 |
Value | Units | Test Method / Conditions | |
Dielectric Strength | 25.0 | KV / mm | IEC 60243 |
Comparative Tracking Index | 600.0 | Volts | IEC60112 |
Volume Resistivity | 10000000000000.0 | Ohms – m | IEC 60093 |
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.45 | - | ASTM D-792 |
Filler Content | 40.0 | % | ASTMD-5630 |
Water Absorption(Saturation. immersed) | 4.5 | % | ASTM D-570 |
Water Absorption (23°C , 24 Hrs) | 1.4 | % | ASTM D-570 |
Value | Units | Test Method / Conditions | |
Feed Zone | 230 - 240 | °C | - |
Compression Zone | 250 - 260 | °C | - |
Mixing Zone | 260 - 270 | °C | - |
Mould Temperatures | 65 - 85 | °C | - |
Value | Units | Test Method / Conditions | |
Mold Shrinkage(Parallel) | 0.32 | % | ASTMD-955 |
Mold Shrinkage(Normal) | 0.88 | % | ASTMD-955 |
Regulatory & Compliance
- Certifications & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC Unless specified, this grade is not suitable for food contact, medical devices or toy applications