Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
High stiffness, dimensional stability including low warp and resistance to sink mark.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Generally recomended for application such as marine hardware,brackets,fitting, bobbins, and power tool housing.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %.- Post Molding Recommendations
Molded components should be conditioned in water at a min of 95 deg C until they absorb 0.8-1.2 % of water above their original weight.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
- Injection Molding
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 85.0 | MPa | ASTM D-638 |
| Tensile Modulus | 6400.0 | MPa | ASTM D-638 |
| Tensile Strain at yield | 4.0 | % | ASTM D-638 |
| Flexural Strength | 140.0 | MPa | ASTM D-790 |
| Flexural Modulus | 5200.0 | MPa | ASTM D-790 |
| Izod Notched Impact Strength(23°C) | 6.0 | Kg-cm/cm | ASTM D-256 A |
| Rockwell Hardness | 120.0 | R Scale | ASTM D-785 |
| Rockwell Hardness | 105.0 | M Scale | ASTM D-785 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (18.5Kg/Sq Cm Load) | 95.0 | °C | ASTM D-648 |
| Heat Deflection Temperature (4.5Kg/Sq Cm Load) | 190.0 | — | ASTM D-648 |
| Flammability UL 94(Thickness 0.8mm) | 220.0 | °C | ASTM D-2117 |
| Melting Point | H.B. | °C | ISO1210/UL-94 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength | 30.0 | KV / mm | IEC 60243 |
| Comparative Tracking Index | 500.0 | Volts | IEC60112 |
| Volume Resistivity | 10000000000000.0 | Ohms – m | IEC 60093 |
| Surface Resistivity | 100000000000000.0 | Ohms | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.49 | — | ASTM D-792 |
| Filler Content | 40.0 | % | ASTMD-5630 |
| Water Absorption(Saturation. immersed) | 5.7 | % | ASTM D-570 |
| Water Absorption (23°C , 24 Hrs) | 1.5 | % | ASTM D-570 |
| Value | Units | Test Method / Conditions | |
| Feed Zone | 260 - 270 | °C | — |
| Compression Zone | 270 - 280 | °C | — |
| Mixing Zone | 270 - 280 | °C | — |
| Mould Temperatures | 80 - 95 | °C | — |
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage(Parallel) | 0.65 | % | ASTMD-955 |
| Mold Shrinkage(Normal) | 0.65 | % | ASTMD-955 |
Regulatory & Compliance
- Certifications & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC Unless specified, this grade is not suitable for food contact, medical devices or toy applications