Next Polymers Next Nylon 6 Prime Series NMS1-01 S.GY.

Identification & Functionality

Features & Benefits

Materials Features: Dimensional Stability,
Good Mechanical Properties,
High Durability,
High Elongation,
High Tensile Strength,
Low Friction,
Self Lubricating,
Semi Crystalline,
Wear Resistant,
Weldable
Benefits: Excellent wear resistance, Self lubricated and Low fricttion characteristics.

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Electrical & Electronics,
Industrial
Applications: Automotive & Transportation — Automotive
Electrical & Electronic Systems,
Exterior & Body,
Interior,
Other Automotive Applications
Building & Construction — Building Materials
Structural Components
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts,
Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
Automotive Electronics,
Consumer Electronics
Plastics & Elastomers End Uses: Automotive Components,
Automotive Exterior Trim,
Automotive Interior Trim,
Bearings,
Bobbins,
Bushings,
Computer Components,
Fittings,
Gears
Plastics & Elastomers Processing Methods: Blow Molding,
Extrusion,
Injection Molding
Product Applications: It is the ideal for dyanamic bearing application, event at elevated temperature ex.gears ,sheaves, sprockets, custom parts etc
Processing Guide: Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %.
Post Molding Recommendations: Molded components should be conditioned in water at a min of 95 deg C until they absorb 0.8-1.2 % of water above their original weight.

Properties

	Value	Units	Test Method / Conditions
Tensile Strength	75.0	MPa	ASTM D-638
Tensile Modulus	2700.0	MPa	ASTM D-638
Elongation at Break	25.0	%	ASTM D-638
Flexural Strength	110.0	MPa	ASTM D-790
Flexural Modulus	3400.0	MPa	ASTM D-790
Izod Notched Impact Strength(23°C)	5.0	Kg-cm/cm	ASTM D-256 A
Rockwell Hardness	110.0	R Scale	ASTM D-785
Coefficient of Friction	0.2	—	ASTM D-1894

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (18.5Kg/Sq Cm Load)	95.0	°C	ASTM D-648
Heat Deflection Temperature (4.5Kg/Sq Cm Load)	180.0	°C	ASTM D-648
Melting Point	220.0	°C	ASTM D-2117
Flammability UL 94(Thickness 0.8mm)	H.B.	—	ISO1210/UL-94
Thermal Conductivity	90.0	-W/(K.m)	ASTME-831
Coefficient of linear thermal Expansion (CLTE) Linear	0.3	μm/m-°C	ASTMD-5930

	Value	Units	Test Method / Conditions
Specific Gravity	1.15	—	ASTM D-792
Water Absorption(Saturation. immersed)	7.0	%	ASTM D-570
Water Absorption (23°C , 24 Hrs)	0.6	%	ASTM D-570

	Value	Units	Test Method / Conditions
Mold Shrinkage(Parallel)	0.85	%	ASTMD-955
Mold Shrinkage(Normal)	0.85	%	ASTMD-955

Regulatory & Compliance

Certifications & Compliance: UL 94
Regulations compliance: Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC Unless specified, this grade is not suitable for food contact, medical devices or toy applications

Knowde Enhanced TDS