Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
Good dimension stability , Good strength & good creep resistance.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Genral purpose application such as cable glands, fuse holder & pannel bord accessories and Textile parts etc.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %- Post Molding Recommendations
Molded components should be conditioned in water at a min of 95 deg C until they absorb 0.8-1.2 % of water above their original weight.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
- Injection Molding
- Rheological Properties
Value | Units | Test Method / Conditions | |
Tensile Strength | 75.0 | MPa | ASTM D-638 |
Elongation at Break | 30.0 | % | ASTM D-638 |
Flexural Strength | 110.0 | MPa | ASTM D-790 |
Flexural Modulus | 3200.0 | MPa | ASTM D-790 |
Izod Notched Impact Strength(23°C) | 5.0 | Kj/m2 | ASTM D-256 A |
Rockwell Hardness | 120.0 | R Scale | ASTM D-785 |
Rockwell Hardness | 85.0 | M Scale | ASTM D-785 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (18.5Kg/Sq Cm Load) | 85.0 | °C | ASTM D-648 |
Heat Deflection Temperature (4.5Kg/Sq Cm Load) | 180.0 | °C | ASTM D-648 |
Melting Point | 260.0 | °C | ASTM D-2117 |
Flammability UL 94(Thickness 0.8mm) | H.B. | - | ISO1210/UL-94 |
Value | Units | Test Method / Conditions | |
Dielectric Strength | 22.0 | V/Mil | ASTMD-149 |
Relative Permittivity (60 Hz) | 600.0 | Volts | UL-746A,PLC Code-0 |
Volume Restivity | 100000000000.0 | Sec. | UL-746A, PLC Code-3 |
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.14 | - | ASTM D-792 |
Water Absorption(Saturation. immersed) | 6.5 | % | ASTM D-570 |
Water Absorption (23°C , 24 Hrs) | 2.1 | % | ASTM D-570 |
Value | Units | Test Method / Conditions | |
Feed Zone | 260 - 270 | °C | - |
Compression Zone | 270 - 275 | °C | - |
Mixing Zone | 275 - 280 | °C | - |
Mould Temperatures | 65 - 85 | °C | - |
Value | Units | Test Method / Conditions | |
Mold Shrinkage(Parallel) | 0.75 | % | ASTMD-955 |
Mold Shrinkage(Normal) | 1.15 | % | ASTMD-955 |
Regulatory & Compliance
- Certifications & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC.