Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
High stiffness and dimensional stability .
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Typical Application include machinary component and housing such as inlet manifold ,air duct, engine cover ,filter ring , pulleys and wide variety of industries.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %.- Post Molding Recommendations
Molded components should be conditioned in water at a min of 95 °C until they absorb 0.8-1.2 % of water above their original weight.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
- Injection Molding
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 170.0 | MPa | ASTM D-638 |
| Flexural Modulus | 7600.0 | % | ASTM D-790 |
| Izod Notched Impact Strength(23°C) | 10.0 | MPa | ASTM D-256 A |
| Elongation at Break | 4.0 | MPa | ASTM D-638 |
| Flexural Strength | 250.0 | Kg-cm/cm | ASTM D-790 |
| Rockwell Hardness | 110.0 | M Scale | ASTM D-785 |
| Rockwell Hardness | 120.0 | R Scale | ASTM D-785 |
| Value | Units | Test Method / Conditions | |
| Melting Point | 262.0 | °C | ASTM D-2117 |
| Flammability UL 94(Thickness 0.8mm) | H.B. | - | ISO1210/UL-94 |
| Heat Deflection Temperature (18.5Kg/Sq Cm Load) | 250.0 | °C | ASTM D-648 |
| Heat Deflection Temperature (4.5Kg/Sq Cm Load) | 260.0 | °C | ASTM D-648 |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 1.00E+14 | Ohms – m | IEC 60093 |
| Dielectric Strength | 32.0 | KV / mm | IEC 60243 |
| Comparative Tracking Index | 600.0 | Volts | IEC60112 |
| Volume Resistivity | 1.00E+15 | Ohms | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Water Absorption(Saturation. immersed) | 6.0 | % | ASTM D-570 |
| Water Absorption (23°C , 24 Hrs) | 1.9 | % | ASTM D-570 |
| Specific Gravity | 1.32 | - | ASTM D-792 |
| Filler Content | 25.0 | % | ASTMD-5630 |
| Value | Units | Test Method / Conditions | |
| Feed Zone | 260 - 270 | °C | - |
| Compression Zone | 270 - 280 | °C | - |
| Mixing Zone | 280 - 290 | °C | - |
| Mould Temperatures | 65 - 85 | °C | - |
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage(Parallel) | 0.28 | % | ASTMD-955 |
| Mold Shrinkage(Normal) | 0.75 | % | ASTMD-955 |
Regulatory & Compliance
- Certifications & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC Unless specified, this grade is not suitable for food contact, medical devices or toy applications