Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
High Transmittance & High heat resistance.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Lighting Fixture, Lenses, Automotive instrument pannel & Industrial Application.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %.- Post Molding Recommendations
Temperature above 50 Deg.c are liable to demage the surface protection and may also cause the article is warp.Damp stroge conditions should be avoided.
Properties
- Color
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Optical Properties
- Other Properties
- Injection Molding
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 70.0 | MPa | ASTM D-638 |
| Tensile Modulus | 3400.0 | MPa | ASTM D-638 |
| Elongation at Break | 10.0 | % | ASTM D-638 |
| Flexural Strength | 120.0 | MPa | ASTM D-790 |
| Flexural Modulus | 3200.0 | MPa | ASTM D-790 |
| Izod Notched Impact Strength(23°C) | 2.5 | Kg-cm/cm | ASTM D-256 A |
| Rockwell Hardness | 100.0 | M Scale | ASTM D-785 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (18.5Kg/Sq Cm Load) | 102.0 | °C | ASTM D-648 |
| Vicat softening Temperature | 109.0 | °C | ASTM D-1525 |
| CLTE Flow | 7.0e-05 | cm/cm/°C | ASTM D696 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength | 3.1 | — | ASTMD-149 |
| Relative Permittivity (60 Hz) | 20.0 | KV/mm | ASTMD-150 |
| Volume Restivity | 1.0e+15 | Ohms –cm | IEC60243 |
| Surface Restivity | 1.0e+16 | Ohms | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Refractive Index | 1.49 | — | ASTM D542 |
| Transmission, Visible | 91.0 | % | ASTM D-1003 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.18 | — | ASTM D-792 |
| Water Absorption (23°C , 24 Hrs) | 0.3 | % | ASTM D-570 |
| Value | Units | Test Method / Conditions | |
| Feed Zone | 240 - 250 | °C | — |
| Compression Zone | 250 - 260 | °C | — |
| Mixing Zone | 260 - 270 | °C | — |
| Mould Temperatures | 60 - 85 | °C | — |
| Value | Units | Test Method / Conditions | |
| MFR (300°C/1.20 Kgs) | 0.3 | Gm/10min. | IEC 60093 |
| Mold Shrinkage(Parallel) | 0.3 | % | ASTMD-955 |
| Mold Shrinkage(Normal) | 4.0 | % | ASTMD-955 |
Regulatory & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC.