Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- CAS No.
- 134098-61-6
- Technologies
- Product Families
- Active Ingredients
Fenpyroximate: Benzoic acid, 4-[[[(E)-[(1,3-dimethyl-5-phenoxy-1H-pyrazol-4-yl) methylene] amino]oxy]methyl]-1,1-dimethylethyl ester 5.0% Other Ingredients 95.0% Total 100.0%
Features & Benefits
- Product Highlights
- Active on all developmental stages of mites.
- Topical ovicidal activity on eggs.
- Fast knockdown of mites.
- Long-lasting control.
- Product Information
FUJIMITE® SC Miticide/Insecticide is used for the control of leafhoppers, mealybugs, mites, psylla, psyllids, and whiteflies. FUJIMITE SC Miticide/Insecticide stops mite feeding immediately after application. FUJIMITE SC Miticide/Insecticide controls all motile stages of mites by inhibiting cellular respiration in the mitochondrion of cells which results in rapid cessation of all biological activities including feeding and reproduction. Mortality of mites can be observed within 3 to 7 days after intoxication.
FUJIMITE SC Miticide/Insecticide works primarily through contact action, so thorough spray coverage is necessary. Mix with sufficient water and apply as a foliar spray to obtain uniform coverage. Dense foliage or excessive growth will often prevent adequate coverage; adjust spray volumes accordingly. Treat plants when pests are immature or at a susceptible stage and populations are building, before crop damage occurs.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Insecticide Target Species
- Approved Crops
- Almond
- Berry, low growing
- Citrus fruit
- Grape
- Hop
- Mint
- Pistachio
- Pome fruit
- Stone fruit
- Tree nuts
- Nonbearing deciduous fruit, tree nuts, vines
- Directions For Use
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the state or tribal agency responsible for pesticide regulation.
Endangered Species Protection Requirements
This product may have effects on endangered species. When using this product, you must follow the measures contained in the Endangered Species Protection Bulletin for the area in which you are applying the product. To obtain Bulletins, no more than six months before using this product, consult http:/Awww.epa.gov/espp/ or call 1-844-447-3813. You must use the Bulletin valid for the month in which you will apply the product.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours.
For early entry into treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated such as plants, soil, or water, wear:
- Coveralls
- Protective eyewear
- Chemical-resistant gloves (such as barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, and/or Viton)
- Shoes plus socks
- Application Directions
- Make applications immediately after the spray solution is prepared.
- Apply with properly calibrated spray equipment.
- Apply by ground or air using the recommended water spray volume found in the Directions for Use section of this label.
- For aerial equipment, use larger droplet size (greater than 200 microns).
- Thorough spray coverage is essential for mite and insect control.
- For best results, apply when pest populations are beginning to build, before reaching economic thresholds.
- Use Restrictions
- Do not apply within 75 feet of fish-bearing waters.
- Do not use products with the same mode of action in consecutive applications.
- Do not plant rotational crops other than those listed on this label for 30 days following the last application of this product.
- Do not apply through any type of irrigation system.
- Do not use in greenhouse structures.
- Do not apply by Alternate Row Middle (ARM) spray method.
- Mixing Directions
- FUJIMITE SC Miticide/Insecticide Alone - Shake well before using. Begin with clean equipment. Fill spray tank with ¾ of the amount of water needed for the intended application, and then turn on agitation. Pour specified amount of product on the surface of the water in the spray tank. Add the balance of the water to the spray tank with agitation running. Keep agitation running during filling and spraying operations. If spraying must be stopped before emptying the sprayer, resume agitation before spraying the remainder of the load. Mix only as much spray solution as can be sprayed within four hours. Storage and use of the previous day’s spray mix may result in reduced activity.
- FUJIMITE SC Miticide/Insecticide Tank Mixtures - It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
Begin with clean equipment. Fill spray tank with ¾ of the amount of water needed for the intended application, and turn on agitation. If using a buffering agent, add after filling the tank with ¾ amount of water. Add the recommended amount of tankmix products in the following order while maintaining agitation:
- Products in water-soluble packets
- Wettable powders
- Water-dispersible granulars and/or soluble powders
- Flowable liquids (including FUJIMITE SC Miticide/Insecticide)
- Emulsifiable concentrates
- Adjuvants and/or oils
- Remaining amount of water to achieve the desired level
Always follow the labeled mixing instructions of any partner products. Keep agitation running during filling and spraying operations. If spraying must be stopped before emptying the sprayer, resume agitation before spraying the remainder of the load. Storage and use of the previous day’s spray mix may result in reduced activity.
If you have no experience with the combination you are considering, conduct a test to determine physical compatibility. To determine physical compatibility, add the proportions of each chemical with the same proportion of water specified on the label as will be present in the chemical supply tank into a suitable container; mix thoroughly and allow to stand for five minutes. If the combination remains mixed, or can be readily remixed, the mixture is considered physically compatible.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Regulatory & Compliance
- EPA Reg. No. 71711-4
- EPA Est. No. 67545-AZ-1
- EPA Est. No. 70851-GA-001
- EPA Est. No. 39578-TX-1
Storage & Handling
- Storage & Disposal
- Do not contaminate water, food, or feed by storage or disposal.
- Pesticide Storage - Store in original container, unopened, in a cool, dry place.
- Pesticide Disposal - Wastes resulting from the use of this product must be disposed of on site or at an approved waste disposal facility.
- Container Handling (Nonrefillable container) - Do not reuse or refill this container. Completely empty bag into application equipment; then offer for recycling if available, or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill or by incineration, or other methods allowed by state and local authorities.