Nilamid A3 WR GF30 - Nilit - PA 66 - Injection Molding

Identification & Functionality

Features & Benefits

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Industrial
Applications: Automotive & Transportation — Automotive
Exterior & Body,
Other Automotive Applications
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts,
Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
Other Devices & Assemblies
Consumer Goods — Housewares
Consumer Goods — Other Consumer Goods Applications
Electrical & Electronics — Other Electrical & Electronics Applications
Plastics & Elastomers End Uses: Automotive Applications,
Consumer Applications,
Electrical/Electronic Applications,
Industrial Applications,
Kitchenware
Plastics & Elastomers Processing Methods: Injection Molding

Properties

	Value	Units	Test Method / Conditions
Tensile Modulus	9800	MPa	ISO 527
Yield stress	185	MPa	ISO 527
Strain at break	2.5	%	ISO 527
Flexural Modulus	5500	MPa	ASTM D 790
Flexural modulus, 23°	8500	MPa	ISO 178
Charpy impact strength (+23°)	55	kJ/m2	ISO 179/1eU
Charpy notched impact strength (+23°)	13	kJ/m2	ISO 179/1eA
Charpy notched impact strength (-30°)	10	kJ/m2	ISO 179/1eA
Charpy impact strength (-30°)	42	kJ/m2	ISO 179/1eU
Izod notched impact strength	8	kJ/m2	ISO 180/1A
Izod notched impact strength, +23°	11	kJ/m2	ISO 180/1A
Temperature	-30	°C	-
Flexural modulus temperature	90	°C	-

	Value	Units	Test Method / Conditions
Temperature of deflection under load (1.80 Mpa)	250	°C	ISO 75-1/-2
Temperature of deflection under load (0.45 Mpa)	260	°C	ISO 75-1/-2
Oxygen index	24	%	ISO 4589-1/-2
Thickness tested	0.4	mm	-
Vicat softening temperature	250	°C	ISO 306
Burning Behavior at 1.5 mm nominal thickness	HB	class	IEC 60695-11-10
Burning Behavior at thickness	HB	class	IEC 60695-11-10
Yellow Card available	yes	-	-

	Value	Units	Test Method / Conditions
Water absorption	5.5	%	Sim. to ISO 62

Packaging & Availability

Nilamid® A3 WR GF30