Products

Nilit POLYNIL® P240 LHSV is a high viscosity unreiforced Polyamide 66 (Nylon 66) for injection molding.This high molecular weight 5 viscosity Polyamide 66 resin is heat stabilized and designed for improved wear resistance and melt strenght.

Nilit POLYNIL® P50 FI is an unreiforced Polyamide 66 (Nylon 66) for injection molding, UL listed V2.This general pourpose 2.7 viscosity Polyamide 66 resin is internally lubricated.POLYNIL® P50 FI is FDA compliant.

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 W GB30 is a Polyamide 6 (Nylon 6) compound, 30% glass bead reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit POLYNIL® P50/1 is an unreiforced Polyamide 66 (Nylon 66) for compounding and alloying.This general pourpose 2.7 viscosity Polyamide 66 resin is FDA compliant.POLYNIL® P50/1 has moisture content lower than 0.1%.

Nilit NILAMID® A3 J10 GF13 is a Polyamide 66 (Nylon 66) compound, 13% glass fiber reinforced, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A3 J10 GF13 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A3 H CF20 is a Polyamide 66 (Nylon 66) compound, 20% carbon fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 H CF20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit POLYNIL® P45/2 is an unreiforced Polyamide 66 (Nylon 66) for compounding and alloying.This general pourpose 2.6 viscosity Polyamide 66 resin is FDA compliant.POLYNIL® P45/2 has moisture content lower than 0.2%.

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 MGF2010 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber reinforced, 20% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 MGF2010 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® XS1 GF50 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 50% glass fiber reinforced, low warpage.

Nilit POLYNIL® P50 N is an unreiforced nucleated Polyamide 66 (Nylon 66) for injection molding, UL listed V2.This general pourpose 2.7 viscosity Polyamide 66 resin is designed for fast cycling.

Nilit Nilamid® XT4 GF30 is a specialty PPA compound designed for applications with thermal requirements significantly higher than those of polyamide 6.6 high stiffness and strength at elevated temperatures high dimensional stability excellent creep resistance resistance to chemicals and hydrolysis PPA, 30% glass fiber reinforced, heat stabilized, designed for improved cycle time.

Nilit Nilamid® A3 H is a nilamid® a3 is an unfilled polyamide 66 (nylon 66) compound heat stabilized.This compound is intended for injection molding.Nilamid® a3 is primarily designed for the automotive industry. It is also suitable for electrical and electronic or industrial & consumer applications.

Nilit Nilamid® XS3 CF40 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 40% carbon fiber reinforced.

POLYNIL® C50 is an unreiforced Polyamide 66/6 (Nylon 66/6) copolymer for compounding and alloying.This general pourpose 2.7 viscosity Polyamide 66/6 resin is FDA compliant.

Nilit NILAMID® B3 W M30 is a Polyamide 6 (Nylon 6) compound, 30% mineral filled, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W M30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® XS3 GF40 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 40% glass fiber reinforced.

Nilit NILAMID® A3 TF20 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with 20% PTFE.This compound is intended for injection molding.NILAMID® A3 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit POLYNIL® P60 is an unreiforced Polyamide 66 (Nylon 66) for extrusion.This 2.9 viscosity Polyamide 66 resin is FDA compliant and is NSF-61 certified for contact with potable water.

Nilit POLYNIL® P230 is an unreiforced Polyamide 66 (Nylon 66) for film casting and blowing.This 4.7 viscosity Polyamide 66 resin is FDA compliant and is NSF-61 certified for contact with potable water.

POLYNIL® P75 BR is a bright unreiforced Polyamide 66 (Nylon 66) for extrusion.This 3.1 viscosity Polyamide 66 resin is FDA compliant.

Nilit POLYNIL® P240 is an unreiforced Polyamide 66 (Nylon 66) for film casting and blowing.This 5.0 viscosity Polyamide 66 resin is FDA compliant and is NSF-61 certified for contact with potable water.

Nilit NILAMID® B3 GF50 is a Polyamide 6 (Nylon 6) compound, 50% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® B3 VNGF30 is a nilamid® a3 vngf30 is a cross linkable polyamide 6 (nylon 6) compound, 30% glass fiber reinforced.This compound is intended for injection molding.Nilamid® a3 vngf30 is primarily designed for electrical and electronic industry. It is also suitable for automotive applications.

Nilit NILAMID® B3 GF30 TM2 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit Nilamid® XT4 GF50 is a specialty PPA compound designed for applications with thermal requirements significantly higher than those of polyamide 6.6 high stiffness and strength at elevated temperatures high dimensional stability excellent creep resistance resistance to chemicals and hydrolysis PPA, 50% glass fiber reinforced, heat stabilized, designed for improved cycle time.

Nilit NILAMID® A2 H J10 is an unfilled low viscosity Polyamide 66 (Nylon 66) compound, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A2 H J10 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit Nilamid® A3 J28 is a nilamid® a3 j20 is an unfilled polyamide 66 (nylon 66) compound, high impact modified.This compound is intended for injection molding.Nilamid® a3 j20 is primarily designed for the automotive industry. It is also suitable for industrial & consumer applications.

Nilit NILAMID® A3 TM2 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit POLYNIL® PR40 LHS is an unreiforced recycled Polyamide 66 (Nylon 66) from semi dull fibers for injection molding.This 2.6 viscosity Polyamide 66 resin is heast stabilized..

Nilit Nilamid® XS3 GF55 TF10 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 55% glass fiber reinforced, 10% ptfe lubricated.

Nilit NILAMID® A3 AL40 is a Polyamide 66 (Nylon 66) compound, 40% aluminum filled.This compound is intended for injection molding.NILAMID® A3 AL40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 D10 is an unfilled Polyamide 6 (Nylon 6) compound, impact modified.This compound is intended for injection molding.NILAMID® B3 D10 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A3 GB50 is a Polyamide 66 (Nylon 66) compound, 50% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.