Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Applications
- Coating Type
- Uses
For hard, wear-resistant coatings, synthetic resin mortars and foam industry
- Properties / Applications
In combination with other polyols such as Nivapol Polem A 1145, 1155 and crosslinked with MDI, Nivapol Polem A 1165 is suitable for use in thin coatings and top-layers. Its high hydroxyl content makes it easy to use with MDI Prepolymers which results in hard wear- and chemical-resistant coatings with an approximated Shore D 80. Because of its low viscosity Polem A 1165 is very easy to deair which makes it suitable for clear Topcoats also. These are mainly used on concrete and asphalt floors and steel surfaces.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Iodine Color Value | 3 | — | DIN EN 1557 |
Acid Value | 2 | mg KOH/g | DIN EN ISO 2114 |
Density (20°C) | 1 | g/ml | DIN EN ISO 2811 |
Hydroxyl Content | 80 - 84 | % | DIN 53 240/2 |
Water Content | max. 02 | % | DIN 51 777-1 |
Equivalent Weight | 172 | — | — |
Flash Point | 190 | °C | DIN EN ISO 2719 |
Renewable | 47 | % | — |
OH Value | 330 | KOH/g | — |
Thickness | 2 | mm | — |
Temperature Resistance | max. 90 | °C | — |
Temperature Resistance | min. 90 | °C | — |
Adhesion to Concrete | min. 15 | MpA | BS/EN 24614 |
Abrasion Resistance (Taber) | max. 6000 | mg | EN 1504-2 |
Hardness | 80 | Shore D | DIN 53505 |
Viscosity (23°C) | 700 | mPa·s | DIN EN ISO 3219/A.3 |
Regulatory & Compliance
- Labeling and REACH applications
This product data sheet is only valid in conjunction with the latest edition of the corresponding Safety Data Sheet. Any updating of safetyrelevant information – in accordance with statutory requirements – will only be reflected in the Safety Data Sheet, copies of which will be revised and distributed. Information relating to the current classification and labeling, applications and processing methods and further data relevant to safety can be found in the c
Technical Details & Test Data
- Compatibility
Generally speaking, Nivapol Polem A 1165 is compatible with polyols and MDI and HDI polyisocyanates. Given the many different products on the market, compatibility testing is always advisable.
Packaging & Availability
- Packaging Type
- Packaging
Bulk/IBC 1000 kgs./drum 200 kgs.
Storage & Handling
- Solubility / Thinnability
Generally speaking, Nivapol Polem A 1165 has good compatibility with the solvents listed. However, the solutions have to be tested for their storage stability. Nivapol Polem A 1165 can be thinned with esters, ketones, ether esters and aromatic hydrocarbons. Prolonged storage of a solution with low binder content may result in turbidity and sedimentation. Only PUR grade solvents should be used (< 0.05% water). The solvent should not contain reactive groups.
- Storage
When stored in originally sealed containers the product will remain stable for at least 6 months.