Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Applications
- Coating Type
- Uses
Low viscosity polyol for flexible floor coatings and sports floors.
- Properties / Applications
In combination with other polyols such as Polem A 1145, 1155 and crosslinked with MDI. Polem A 1170 is suitable for Flexible floor coatings and high elastic coatings with good mechanical. Properties. It is also used for elastic sealant- and adhesive pastes where mechanical properties like elongation or crack bridging are requested.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Hydroxyl Content | 475 - 565 | % | DIN 53 240/2 |
| Water Content | max. 01 | % | DIN 51 777-1 |
| Density (20°C) | 098 ± 0.01 | g/ml | DIN EN ISO 2811 |
| Equivalent Weight | approx.326 | — | — |
| Renewable | 79 | % | — |
| OH Value | 172 | KOH/g | — |
| Thickness | 2 | mm | — |
| Temperature Resistance | max. 90 | °C | — |
| Temperature Resistance | min. 90 | °C | — |
| Adhesion to Concrete | min. 15 | MpA | BS/EN 24614 |
| Abrasion Resistance (Taber) | max. 6000 | mg | EN 1504-2 |
| Hardness | 55 | Shore D | DIN 53505 |
Regulatory & Compliance
- Labeling and REACH applications
This product data sheet is only valid in conjunction with the latest edition of the corresponding Safety Data Sheet. Any updating of safetyrelevant information – in accordance with statutory requirements – will only be reflected in the Safety Data Sheet, copies of which will be revised and distributed. Information relating to the current classification and labeling, applications and processing methods and further data relevant to safety can be found in the c
Technical Details & Test Data
- Compatibility
Packaging & Availability
- Packaging Type
- Packaging
Bulk/IBC 1000 kgs./drum 200 kgs.
Storage & Handling
- Solubility / Thinnability
Generally speaking, Polem A 1170 has good compatibility with the solvents listed. However, the solutions have to be tested for their storage stability. Polem A 1170 can be thinned with esters, ketones, ether esters and aromatic hydrocarbons. Prolonged storage of a solution with low binder content may result in turbidity and sedimentation. Only PUR grade solvents should be used (< 0.05% water). The solvent should not contain reactive groups.
- Storage
When stored in originally sealed containers the product will remain stable for at least 6 months.