Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Silver pearlescent effect
- Excellent flow and leveling
- Good rub resistance
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Directions
Must be mixed before use and check viscosity. Add 1% water or 50/50 blend of Water/IPA under agitation to reduce coating viscosity 3” # 3 Zahn. Pearlescent pigments will settle so mixing will be required before use and light agitation while on press.
Properties
- Color
- Specifications
Value | Units | Test Method / Conditions | |
Flash Point (TCC) | min. 200 | °F | — |
pH Value | 8.0 - 8.5 | — | — |
Weight/Gallon | 8.76 | — | — |
Gloss (points over stock, depending on porosity) | 2022-10-30 | — | — |
Rub Resistance | 2022-09-10 | — | — |
Slip (face to face) | 15 - 20 | degrees | — |
COF (face to face) | .26 -.36 | — | — |
Block Resistance (face to face, 100% RH, 24hr) | Pass 120 | °F | — |
Gluing, Stamping | Test before using | — | — |
UV Primer | Test before using | — | — |
Viscosity (#3 Signature Zahn Cup , 77°F) | 18 - 20 | — | — |
Inks | Use recoatable inks only | — | — |
Dilution (water will reduce viscosity 3” #3 Zahn) | 1.0 | % | — |
Percent Solids | 40.0 +/- 2 | — | — |
Freeze/Thaw Stability | 1.0 | cycle | — |
Drying | Pile 105 F 1st side, 95F 2nd side | — | — |
Clean-Up | Warm water. Water + ammonia for dried coating. | — | — |
Storage & Handling
- Shelf Life
- 6 months, 3 after opening