Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Excellent rub resistance.
- Excellent gloss.
- Excellent flow and leveling.
- Acceptable dry speed.
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Directions
Mix before use and check viscosity. Add 1% water or 50/50 blend of Water/IPA under agitation to reduce coating viscosity 4” # 3 Zahn./
Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| Flash Point (TCC) | min. 200 | °F | — |
| pH Value | 8.2 - 8.7 | — | — |
| Weight/Gallon | 8.76 | — | — |
| Gloss | 10 - 30 | — | — |
| Rub Resistance | 2022-09-10 | — | — |
| Slip (face to face) | 15 - 20 | degrees | — |
| COF (face to face) | .24 - .36 | — | — |
| Block Resistance (face to face, 100% RH, 24hr) | Pass 120 | °F | — |
| Gluing, Stamping | Suitable with some glues and foils, Test First. | — | — |
| UV Primer | Suitable with some UV coatings, Test First. | — | — |
| Viscosity (#3 Signature Zahn Cup , 77°F) | 18 - 20 | — | — |
| Inks | Use recoatable inks only | — | — |
| Dilution (water will reduce viscosity 3” #3 Zahn) | 1.0 | % | — |
| Wet Film Weight | 3 - 6 | micron | — |
| Percent Solids | 40.0 +/- 2 | — | — |
| Freeze/Thaw Stability | 1.0 | cycle | — |
| Drying | Pile 105 F 1st side, 95F 2nd side | — | — |
| Clean-Up | Warm water. Water + ammonia for dried coating. | — | — |
Storage & Handling
- Shelf Life
- 12 months, 6 after opening