Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Grease resistant.
- Cold / humid resistant.
- FDA compliant (176.170 and 176.180) with limitations.
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Directions
Mix before use and check viscosity. Add water or 50/50 blend of water/IPA under agitation to reduce coating viscosity.
Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| Flash Point (TCC) | min. 212 | °F | — |
| pH Value | 8.0 - 8.7 | — | — |
| Weight/Gallon | 8.76 | — | — |
| Gloss | 10 - 30 | — | — |
| Rub Resistance | 2022-08-10 | — | — |
| Slip (face to face) | 21 - 24 | degrees | — |
| COF (face to face) | .32 -.36 | — | — |
| Block Resistance (face to face, 100% RH, 24hr) | Pass 120 | °F | — |
| Gluing, Stamping | Suitable with some glues and foils, Test First. | — | — |
| UV Primer | Suitable with some UV coatings, Test First. | — | — |
| Viscosity (#3 Signature Zahn Cup , 25°C) | 18 - 22 | — | — |
| Inks | Coatable inks only | — | — |
| Dilution (water will reduce viscosity 3” #3 Zahn) | 1.0 | % | — |
| Wet Film Weight | 3 - 6 | micron | — |
| Percent Solids | 45.0 +/- 2.0 | — | — |
| Freeze/Thaw Stability | 1.0 | cycle | — |
| Drying | Pile 105F 1st side, 95 F second | — | — |
| Clean-Up | Warm water or water + ammonia | — | — |
| VOC | 0.48 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 12 months, 6 after opening