Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Good rub resistance.
- Excellent gloss/Dry speed combination.
- Excellent flow and leveling.
Applications & Uses
- Markets
- Application Method
- Cure Method
- Directions
Mix before use and check viscosity. Add 1% water or 50/50 blend of Water/IPA under agitation to reduce coating viscosity 4” # 3 Zahn
Properties
- Specifications
Value | Units | Test Method / Conditions | |
Weight/Gallon | 8.76 | — | — |
Flash Point (TCC) | min. 200 | °F | — |
pH Value | 8.0 - 8.5 | — | — |
Gloss | 10 - 30 | — | — |
Rub Resistance | 2022-08-10 | — | — |
Slip (face to face) | 17 - 21 | degrees | — |
COF (face to face) | .30 -.38 | — | — |
Block Resistance (face to face, 100% RH, 24hr) | Pass 120 | °F | — |
Gluing, Stamping | Suitable with some glues and foils, Test First. | — | — |
UV Primer | Suitable with some UV coatings, Test First. | — | — |
Viscosity (#3 Signature Zahn Cup , 77°F) | 18 - 20 | — | — |
Inks | Use recoatable inks only | — | — |
Dilution (water will reduce viscosity 3” #3 Zahn) | 1.0 | % | — |
Wet Film Weight | 3 - 6 | micron | — |
Percent Solids | 40.0 +/- 2 | — | — |
Freeze/Thaw Stability | 1.0 | cycle | — |
Drying | Pile 105 F 1st side, 95F 2nd side | — | — |
Clean-Up | Warm water. Water + ammonia for dried coating. | — | — |
Storage & Handling
- Shelf Life
- 12 months, 6 after opening