Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Good rub resistance.
- Excellent gloss/Dry speed combination.
- Low odor.
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Directions
Mix before use and check viscosity. Add 1% water or 50/50 blend of W ater/IPA under agitation to reduce coating viscosity 4” # 3 Zahn.
Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| Flash Point (TCC) | min. 200 | °F | — |
| pH Value | 8.0 - 9.0 | — | — |
| Weight/Gallon | 8.76 | — | — |
| Gloss | 10 - 30 | — | — |
| Rub Resistance | 2022-08-10 | — | — |
| Slip (face to face) | 17 - 21 | degrees | — |
| COF (face to face) | .30 - .38 | — | — |
| Block Resistance (face to face, 100% RH, 24hr) | Pass 120 | °F | — |
| Gluing, Stamping | Suitable with some glues and foils, Test First. | — | — |
| UV Primer | Suitable with some UV coatings, Test First. | — | — |
| Viscosity (#3 Signature Zahn Cup , 70°F) | 18 - 20 | — | — |
| Inks | Use recoatable inks only | — | — |
| Dilution (water will reduce viscosity 3” #3 Zahn) | 1.0 | % | — |
| Wet Film Weight | 3 - 6 | micron | — |
| Percent Solids | 41.0 +/- 2 | — | — |
| Freeze/Thaw Stability | 1.0 | cycle | — |
| Drying | Pile 105 F 1st side, 95F 2nd side | — | — |
| Clean-Up | Warm water. Water + ammonia for dried coating. | — | — |
Storage & Handling
- Shelf Life
- 12 months, 6 after opening