company tower banner
Novagard Company Logo

Novagard® G644

1 of 11 products in this brand
Novagard® G644 is a heat transfer compound that is formulated with select polydimethyl siloxane fluids in combination with metallic oxide fillers to provide superior thermal conductivity.

Product Type: Heat Transfer Fluid

Application Area: Electrical Components

Features: Good Thermal Conductivity, Long Shelf Life

Chemical Family: Siloxanes

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Ready-to-Use Product Features

Applications & Uses

Application Area
Applications

Designed for use as a heat transfer compound in both the electrical and the electronic industries, Novagard G644 is similar to the original thermal compound, G641, only formulated to a higher penetration specification (softer). Characterized by its high thermal conductivity, high dielectric constant, and high dissipation factor, Novagard G644 is an ideal material for use in thermocouple wells, power diodes, transistors, semiconductors, and ballasts, among various other applications. Novagard G644 exhibits excellent longterm storage stability, without the oil separation that is common to other brand names.

Restrictions

Do not use in or around highly oxidative chemicals such as liquid oxygen, chlorine, or peroxides. Not recommended for surfaces that are to be painted.

Properties

Appearance
White Paste
Physical Properties
ValueUnitsTest Method / Conditions
Bleed (200°C/ 24 hours)max. 2.0%-
Dielectric Constant3.81-ASTM D150
Dielectric Strength (10 mil Gap)400.0Volts/milASTM D149
Dissipation Factor0.0032-ASTM D150
Evaporation (200°C/ 24 hours)max. 2.0%-
Penetration (Worked 60X)290 - 330-ASTM D217
Specific Gravitymin. 2.3--
Thermal Conductivity0.38BTU/ft2 -F-hrHot Wire Method
Volume Resistivity1.5 x 10^15Ω/cm3ASTM D257

Safety & Health

Precautions

Silicone compounds may be cleaned with non-polar solvents such as toluene, hexane, and mineral spirits. Whenever using solvents be certain to observe all proper, safety precautions. Not for application on surfaces that are to be painted. Consult and obey all applicable local, state, and federal regulations for disposal of solvent and silicone waste.

Packaging & Availability

Packaging Type
Availability

NovagardG644 is available in 5 ounce squeeze tubes, 1 pint cans, 1 gallon pails, 5 gallon pails, and 55 gallon drums.

Storage & Handling

Storage

NovagardG644 has a shelf-life of sixty (60) months from the date of manufacture, as indicated by the lot number, when stored in the original, unopened container at, or below, 100ºF.