Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Applications
This product has an exceptionally broad operating temperature range; the grease retains its lubricity at temperatures as low as –100°F (-73°C), which makes it well suited for use in cryogenic systems. Also, Versilube G321 is designed to have excellent long term aging and work stability characteristics that make it ideal for use in neglected areas.
- Restrictions
Do not use in or around highly oxidative chemicals such as liquid oxygen, chlorine, or peroxides.
Properties
- Appearance
- Off-White to Tan Paste
- Physical Properties
Value | Units | Test Method / Conditions | |
Bleed (150°C/ 24 hours) | max. 4.0 | % | — |
Corrosion (Copper Substrate) | No effect | — | — |
Dirt Count (≥125 µm) | 0 | — | — |
Dirt Count (≥25 µm) | max. 7500 | — | FED-STD-791D |
Dirt Count (≥75 µm) | max. 1600 | — | — |
Dropping Point | min. 190 | °C | ASTM D2265 |
Evaporation (150°C/ 24 hours) | max. 3.0 | % | — |
Operating Temperature | -73 to 204 | °C | — |
Oxygen Stability (150°C/ 50 hours) | max. 5 | psi | ASTM D942 |
Penetration (Worked 60X) | 260 - 300 | — | ASTM D217 |
Specific Gravity | 0.99 - 1.04 | — | — |
Water Washout | max. 3.0 | % | ASTM D1264 |
Safety & Health
- Precautions
Silicone greases may be cleaned with non-polar solvents such as toluene, hexane, and mineral spirits. Whenever using solvents be certain to observe all proper, safety precautions. Not for application on surfaces that are to be painted. Consult and obey all applicable local, state, and federal regulations for disposal of solvent and silicone waste.
Packaging & Availability
- Packaging Type
- Availability
Versilube G321 is available in 5.3 ounce tubes, 1 gallon pails, 5 gallon pails, and 55 gallon drums.
Storage & Handling
- Storage
Versilube G321 has a shelf-life of sixty (60) months from the date of manufacture when stored in the original, unopened container at, or below, 100ºF. Upon prolonged storage, it is normal for a small amount of fluid bleed to appear on the surface of the grease. This condition is not detrimental to the performance and the fluid is simply mixed back into the suspension.