company tower banner

Products

NUC

8 Products found on NUC in Industrial & Transport Packaging

TDSWith TDS

NUC NUC-3888 banner

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Extrusion
End Uses:Shrink Wrap, Stretch Films
Melt Flow Index:1.8 - 1.8 g/10 min

NUC's EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

NUC DQDJ-3269 banner

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Hot Melt, Injection Molding
End Uses:Shrink Wrap, Stretch Films
Melt Flow Index:20.0 - 20.0 g/10 min

NUC's EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

NUC NUC-8321 banner

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blow Molding
Melt Flow Index:2.4 - 2.4 g/10 min

NUC's LDPE are used in many of packages, bottles and tubes for daily necessities such as seasonings, eye drops, internal medicine as well as cosmetics which are produced by hollow molding, extrusion molding or injection molding due to good processability.

NUC DQDJ-1868 banner

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Extrusion, Blow Molding, Injection Molding
End Uses:Shrink Wrap, Stretch Films
Melt Flow Index:2.3 - 2.3 g/10 min

NUC's EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

NUC NUC-3660 banner

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Injection Molding
End Uses:Shrink Wrap, Stretch Films
Melt Flow Index:5.5 - 5.5 g/10 min

NUC's EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

NUC NUC-8450 banner

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Extrusion
End Uses:Shrink Wrap, Stretch Films
Melt Flow Index:1.5 - 1.5 g/10 min

NUC's EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

NUC NUC-3195 banner

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
End Uses:Shrink Wrap, Stretch Films
Melt Flow Index:5.0 - 5.0 g/10 min

EVA is widely used in the film and sheet fields because of its high transparency and good processability, and it is often used in commercial wraps, meat packaging and agricultural houses. It is also used as a base resin for additive master batches such as foaming agents and flame retardants, and is also used as one of the raw materials for manufacturing various industrial products.

NUC DND-2450 banner

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blow Molding
Melt Flow Index:1.3 - 1.3 g/10 min

NUC's LDPE are used in many of packages, bottles and tubes for daily necessities such as seasonings, eye drops, internal medicine as well as cosmetics which are produced by hollow molding, extrusion molding or injection molding due to good processability.