Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Base
- Synthetic Latex
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Designed Use
Designed for hard-to-bond coated stock with quick setting capabilities. This adhesive is also formulated to bond some open-cell foam material to board.
- Application
- Surface Preparation - Substrate must be clean, dry, and free of contaminants; e.g., release agents, dirt, dust, etc.
- Application - Extrude, spray, or roll
- Cure-Air Dry - 16 to 24 hours at room temperature to handle.
- Force Dry - Recommend 10 - 20 minutes at 160 - 260 °F.
- Clean Up - Use warm water and detergent (before cure).
Properties
- Odor
- Characteristics, Slight Ammonia
- Appearance
- White Liquid (Dries Clear)
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity (RVF 3-20, 25 °C) | 1500 - 1800 | cP | — |
| Solids | 53 - 57 | % | — |
| Density | 8.7 - 9.1 | lbs/gal | — |
| pH | 4.0 - 6.0 | — | — |
| Film | Clear | — | — |
| Borax Tolerance | Coagulates | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautions
Health
Work in well ventilated areas. Avoid prolonged or repeated contact with skin. Wear safety glasses.
Environmental
Incinerate or bury in landfill in accordance with all local, state, and federal regulations.
Packaging & Availability
- Standard Packaging
55 Gallon Drums, 5 Gallon Plastic Pails, 1 Gallon Cans
Storage & Handling
- Storage
Store in controlled dry area. Keep well sealed and at ambient temperature. Avoid freezing temperatures.
- Recommended Inventory
90 days
- Shelf Life
1 Year