Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Charpy Impact Strength | 7 | KJ/m² | ISO 179-2:1999 |
| Hardness | 85 | Shore D | ISO 868:2003 |
| Coefficient of Friction (Dynamic) | 0.25 | - | ISO 180:2000 |
| Compressive Modulus | 2600 | MPa | ISO 604:2002 |
| Compressive Strength | 110 | MPa | ISO 604:2002 |
| Density | 0.91 | g/cm³ | ISO 1183:1997 |
| Elongation at break | 7 | % | ISO 527-1/2:1993 |
| E-modulus | 2700 | MPa | ISO 527-1/2:1993 |
| Flexural Modulus | 1200 | MPa | ISO 178:2001 |
| Flexural Strength* | 80 | MPa | ISO 178:2001 |
| Izod Impact Strength | 7.2 | KJ/m² | ISO 180:2000 |
| K-Factor | - | mm³/Nm | — |
| Limiting PV | 6 | MPa/m.min | — |
| Tensile Strength | 26 | MPa | ISO 527-1/2:1993 |
| Water Absorption (24 Hours) | 0.2 | % | ISO 62:1999(Modified) |
| Water Absorption (Saturation) | 0.9 | % | ISO 62:1999 |
| Wear Rate | - | mg/km | — |
| Value | Units | Test Method / Conditions | |
| Coefficient of Linear Thermal Expansion(TMA) | 7 x10¯5 | °C¯¹ | — |
| Flammability | HB | - | — |
| Glass Transition Temperature (Tg) | -60 | °C | — |
| Heat Deflection Temperature HDT/A | 110 | °C | — |
| Heat Deflection Temperature HDT/B | 74 | °C | — |
| Maximum Continuous Service Temp | 82 | °C | — |
| Maximum Intermittent Service Temp | 140 | °C | — |
| Melting Temperature | 170 | °C | — |
| Minimum Continuous Service Temp | - | °C | — |
| Minimum Intermittent Service Temp | - | °C | — |
| Thermal Conductivity | 0.31 | W/m.°C | — |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking Index | 600 | CTI | IEC 60093:1980-01 |
| Dielectric Constant | 3.8 | - | IEC 60250:1969-01 |
| Dielectric Constant (Low Frequency) | - | - | IEC 60250:1969-01 |
| Dielectric Strength | 16.5 | kV/mm | IEC 60243:-1:1998-01 |
| Dissipation Factor | 0.005 | Hz | IEC 60250:1969-01 |
| Moisture Absorption (Equilibrium) | 0.1 | % | ISO 62:1999 (modified) |
| Surface Resistivity | 1x10^13 | Ohm | IEC 60093:1980-01 |
| Volume Resistivity | 1x1013 | ohm.m | IEC 60243:-1:1998-01 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Availability
- ROD: 16mm - 400mm DIA
- PLATE: 6mm - 100mm THICK
- TUBE: 20mm - 250mm