Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- NYLATECH® SL Offers
- Lowest Dynamic Coefficient of Friction ( .08 – .14 )
- High PV Value ( 15,000 )
- Highly wear resistant
- Easily Machined
- Cost Saving in Maintenance and Down Time
- Non – Galling
- Corrosion Resistant
Applications & Uses
- Markets
- Typical Applications
- Wear Strips
- Bearings / Bushings
- Abrasion Pads
- Rollers, Guide Rails, Star Wheels (Bottling Plants)
- Valve Seats
- Added assurance of part life in applications where other Cast Nylons may fail
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.13 | g/cm³ | - |
| Tensile Strength | 10,000 - 12,000 | psi | - |
| Compressive Strength (10% Deflection) | 14,000 - 15,000 | psi | - |
| Elongation | 20 - 45 | % | - |
| Tensile Modulus | 460000.0 | psi | - |
| Tensile Impact (73°F) | 80 - 130 | ft. lbs./ in. | - |
| Flexural Strength | 15500.0 | psi | - |
| Flexural Modulus | 430000.0 | psi | - |
| Coefficient of Friction (Dynamic) | 0.115 | - | - |
| Coefficient of Friction (Static) | 0.151 | - | - |
| 24 Hour H₂O | 0.3 | % | - |
| Equilibrium H₂O | 1.2 - 3.0 | % | - |
| Hardness | 80 - 84 | - | Scale D |
| Coefficient of Thermal Expansion | 5.5 x 10⁻⁵ | in./in./F | - |
| Continuous Operating Temperature | 220 - 250 | °F | - |
Regulatory & Compliance
- Certifications
All NYLATECH Material is certified to conform with ASTM - 1894 Specification and meet requirements for 21 CFR 177.1500 of the U.S. FDA.
Packaging & Availability
- Standard Sizes
Tubular Bar
- 1 ¾" OD to 6" OD in 50" lengths
- 4” OD to 24” OD in 52” lengths
- 8" OD through 40" OD in 13" or 26" lengths
Rod
- ¾” through 2” diameter in 2’ to 10’ lengths
- 2" through 3 ¾" diameter in 2’ lengths
- 4" through 16" diameter in up to 4’ lengths
- 17" through 36" diameter 1’ lengthsDISK:
- 8" through 68" diameter in a variety of thicknesses
Plate
- 0.25" thick through 7" thick, Available in 2'x4', 3'x4', 4'x4' and 4’x10’
Custom sizes available to improve part yield and reduce material cost.