Products

Nylene Specially formulated nylon 6 molding resin possessing outstanding flow characteristics Ideally suited for applications requiring high flow properties and resistance to cracking Optimum processing conditions should provide a melt temperature of 450 - 470°F at nozzle

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene Highly impact modified nylon 6 resin. PX1719 has very low stiffness for a nylon type resin Can be processed by either injection molding or extrusion Suitable for clips, fasteners, and also tubing and profiles, or any other uses where high impact resistance and maximum flexibility are required

Nylene Toughened, heat-stabilized nylon 6/6 Exhibits an improved impact resistance and flexibility over unmodified nylons Retains the excellent chemical and heat resistance typical of all nylon products Suitable for applications such as clips, fasteners, safety restraint parts, and other parts with snap fit or clip features

Nylene Unreinforced nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene Unreinforced heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene Medium viscosity, fast cycle molding resin.Crystallization initiators provide fast molding cycles through rapid melt set-up.Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon.Suitable for such uses as clips and fasteners, bushings, small levers, gears, and window hardware.Optimum processing conditions should provide a melt temperature of 460 - 480°F at the nozzle.

Nylene 33% glass fiber reinforced heat stabilized nylon 6 injection molding resin. High heat and chemical resistance inherent in nylon type resins, along with higher strength and stiffness due to glass fiber reinforcement. Excellent surface appearance when processed in a warm mold. Suitable for brackets, levers, handles, enclosures, and other applications where high physical properties combined with good appearance are required. The ASTM line call out for this product is D4066 PA022G33

Nylene 14% glass fiber reinforced, impact modified, heat stabilized nylon 6/6 Improved strength and stiffness over un-reinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Vexel™ B12U by Polymeric Resources Corporation is comprised of Polybutylene Terephthalate. It is commonly used as Molding Resin for a variety of applications in Automotive.

Nylon 6/12 molding resin with excellent flexibility and lower moisture absorption

Nylene General purpose un-reinforced nylon 6 injection molding resin. High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding

Nylene Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength possessing excellent wear properties

Nylene 43% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6. Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

Nylene Duratel MF3 is a high-viscosity acetal co-polymer. Duratel MF3 has slightly higher toughness than standard MF9, and parts molded with MF3 should have thicker wall sections and shorter flow lengths to accommodate the higher viscosity. MF3 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications

Norpex® AX235 by Polymeric Resources Corporation is comprised of Polyphenylene Ether. It is commonly used as Molding Resin for a variety of applications in Automotive.

Nylene 33% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6 Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

Nylene Duratel MF9 is an unreinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 issuitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

30% glass fiber-reinforced poly(butylene terephthalate) (PBT) with good moldability

Nylene Heat stabilized version of NYLENE 451 recommended for molding - Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Nylene 43% glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Heat and chemical resistance typical of nylon 6 resins, while glass fiber reinforcement provides outstanding strength and stiffness The nylon 6 base resin also provides excellent surface appearance Suitable for brackets, supports, enclosures, handles, and any other uses which require high stiffness along with good appearance

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Nylene Duratel MF9 is an un-reinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6/6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene General purpose injection molding resin. Lubricated and nucleated for faster cycle times Suitable for applications such as clips & fasteners, bushings & rollers, and other general purpose uses

Nylene 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene 13% glass fiber reinforced, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene Medium-impact modified nylon for fast, easy molding Parts molded from 721 have good impact strength right out of the mold without post conditioning Suitable for applications such as clips, fasteners, and other parts where some initial flexibility and impact resistance is desired Cylinder temperatures should be in the 450°F-500°F range.

Nylene Low wear 30% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced - Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

Nylene Low wear 43% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

Nylene 15% glass fiber reinforced, impact modified, heat stabilized nylon 6 Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Nylene Nylene 5130 PT15 is a low wear 30% glass fiber reinforced nylon 6/6 using Nylene 5130 PT15 provides a low friction and very low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. 5130 PT15 is suitable for applications such as bushings and bearings, wear plates, and other parts where high strength with maximum wear resistance is required.

Nylene Designed for very fast cycle time molding and parts requiring high flow rates, such as long thin parts or high cavitation tools Low viscosity nylon 6 with special nucleation for rapid part set-up and special flow enhancers to aid in molding Excellent choice for parts such as wire ties, clips, fasteners, bushings and bearings