Products

Nylene 33% glass fiber reinforced, heat stabilized nylon 6/6. Heat and chemical resistance inherent in nylon resins, while the glass fiber reinforcement gives greatly increased strength and stiffness. Suitable for such applications as brackets, levers, covers, and other uses where strength and stiffness are required. The ASTM line call out is D4066 PA012G33.

Nylene Heat stabilized nylon 6 copolymer for both extrusion and injection molding Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene NYLENE® BX3WQ662X is a standard viscosity, heat stabilized, special nylon polymer, made specificaly for wire jacketing. Provides excellent performance in applications that require a combination of toughness, abrasion resistance and chemical resistance. UL listed and meeting the requirements of UL 83 for wire jacketing.

Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Nylene Heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility Approved for automotive use under Ford Motor Company specification ESA-M4D379-B and ASTM D4066 PA0161

Nylene 50% glass fiber reinforced, heat-stabilized nylon 6 injection molding resin Specifically designed for maximum strength and stiffness while maintaining the heat and chemical resistance typical of nylon 6 resins Suitable for brackets, enclosures, valve bodies, and other uses where maximum strength and stiffness are required

Nylene Nylene NX1170 is a high viscosity, extrusion grade resin containing 5% molybdenum disulfide for improved wear resistance. The abrasion resistance of nylon 6 is enhanced by the addition of molysulfide. Because of its high melt viscosity, NX1170 can be extruded into rods, tubing, thin films, many complex shapes.

Nylene Toughened, heat-stabilized nylon 6/6 Exhibits an improved impact resistance and flexibility over unmodified nylons Retains the excellent chemical and heat resistance typical of all nylon products Suitable for applications such as clips, fasteners, safety restraint parts, and other parts with snap fit or clip features

Nylene Nylene® 4214 HS is a Polyamide 6 (Nylon 6) material. It is available in North America for extrusion or injection molding.Important attributes of Nylene® 4214 HS are: Heat Resistant Good Flexibility Heat Stabilizer Impact Modified Impact Resistant

Nylene Heat stabilized version of 406 which is a general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up. In addition to protection from heat degradation Parts molded from 409 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle

Nylene Unreinforced heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene Heat stabilized, high impact modified nylon suitable for both molding and extrusion. In addition to heat stabilization to prevent thermal degradation, parts molded from 743HS have excellent R.T. And C.T. Impact strength right out of the mold without post conditioning. Outstanding features of Nylene 743HS include high strength and high cold temperature impact. Cylinder temperatures should be in the 435 - 525°F range.

Nylene Nylene® 7228 HS is a Polyamide 6 (Nylon 6) material filled with 28% glass\mineral. It is available in North America for extrusion or injection molding.Important attributes of Nylene® 7228 HS are: Heat Resistant Heat Stabilizer

Nylene 43% glass fiber reinforced heat stabilized nylon 6/12 Good chemical properties and reduced moisture absorption of nylon 6/12 resins while adding glass reinforcement to increase strength and stiffness Suitable in applications where typical nylon 6 or 6/6 may be unsuitable due to moisture absorption or specific chemical requirements On Special Order only.

Nylene 14% glass fiber reinforced, impact modified, heat stabilized nylon 6/6 Improved strength and stiffness over un-reinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Nylene 40% mineral-reinforced, impact modified, heat-stabilized nylon 6/6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics, with slightly higher strength and stiffness than 6440. 6111 is suitable for such applications as housings, enclosures, stanchions, and engine covers

Nylene High viscosity heat-stabilized extrusion grade for film co-extrusion and blown film Excellent melt stability and good melt strength. Excellent chemical resistance, toughness, and resistance to abrasion

Nylene Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene 40% mineral-reinforced, heat-stabilized nylon 6/6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics Suitable for such applications as housings, enclosures, stanchions, and engine covers

Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications

Nylene Heat stabilized version of 721 which is a medium-impact modified nylon for fast, easy molding In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 724 have good impact strength right out of the mold without post conditioning Stiffness is near that of unmodified nylon 6 Barrel temperatures should be in the 450°F - 500°F range.

Nylene 43% glass fiber reinforced, heat stabilized nylon 6/6. Has the heat and chemical resistance inherent in nylon resins, while the glass fiber reinforcement gives greatly increased strength and stiffness Suitable for such applications as brackets, levers, covers, and other uses where high strength and stiffness are required

Nylene 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene 36% mineral-reinforced, impact modified, heat-stabilized nylon 6/6 Used in applications where the dimensional stability and added stiffness are desired, but higher impact resistance is also needed Has the heat and chemical resistance typical of nylon 6/6 materials Ssuitable for housings and enclosures, brackets and fixtures, and other applications which require this unique set of properties

Nylene Mineral-reinforced,heat-stabilized nylon 6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics, while having a very good surface appearance Suitable for such applications as housings, enclosures, stanchions, and engine covers

Nylene Heat stabilized version of NYLENE 451 recommended for molding - Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Nylene 43% glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Heat and chemical resistance typical of nylon 6 resins, while glass fiber reinforcement provides outstanding strength and stiffness The nylon 6 base resin also provides excellent surface appearance Suitable for brackets, supports, enclosures, handles, and any other uses which require high stiffness along with good appearance

Nylene Heat stabilized, 13% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness The product is approved to Ford Motor Company specification ESE-M4D349-A The ASTM line call out is D4066 PA012G13

Nylene 7210 HS has a filler/reinf consisting of 28% GF/MR.

Nylene 15% glass fiber reinforced, impact modified, heat stabilized nylon 6 Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Heat stabilized, 5% glass fiber-reinforced nylon 6/6 with improved stiffness

Nylene Heat stabilized nylon copolymer with 14% glass fiber reinforcement Developed to have excellent light transmittance combined with high strength, stiffness, and resistance to automotive type fluids Suitable for such uses as under-the-hood fluid reservoirs Maximum clarity is achieved by using low mold temperatures

Nylene Nylene NX4004A HS BLACK is a heat stabilized, economy grade nylon for general purpose molding applications. In addition to protection from heat degradation, NX4004A HS BLACK has good flow characteristics at typical processing temperatures for nylon 6. Optimum processing conditions should provide a melt temperature of 450 - 470°F at the nozzle.

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6/6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses