Products

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene Unreinforced general purpose polycarbonate injection molding grade Has the high impact resistance and heat resistance typical of polycarbonate Available in water white, blue tint, black, and pre-colored Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses

Nylene General purpose, 20 % glass fiber-reinforced poly(phenylene ether) (PPE) alloy Areas of application include water contact areas such as impellers and pump housings Suitable for applications such as motor housings which require high modulus and distortion temperature

Nylene 30% glass fiber reinforced flame retardant PBT molding resin Listed with a UL yellow card in black color, and a similar grade is available in natural Suitable for housings, enclosures, bobbins, and other applications which require good electrical properties and flame retardancy

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6/6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene General purpose 15% glass fiber reinforced PBT polyester resin Has the high chemical and heat resistance of PBT combined with improved strength and stiffness Suitable for brackets, levers, electrical connectors, housings and other similar uses

Nylene Un-reinforced general purpose polycarbonate Retains the high impact resistance and heat resistance of virgin polycarbonate while improving the cost / perfomance ratio Suitable for such applications as housings and enclosures, brackets, connectors, etc

Nylene Glass and ceramic fiber reinforced nylon 6 injection molding material Designed to provide high dimensional stability, very high stiffness, and a hard surface, while maintaining the heat and chemical resistance typical of nylon products Suitable for such uses as valve bodies, pump housings, hydraulic fittings and couplings, and other applications which require this unique set of characteristics

Nylene 33% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6 Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

Nylene 20% glass fiber reinforced Polycarbonate Improved stiffness over un-reinforced PC grades Suitable for applications such as housings, brackets, levers, and other uses that require toughness with increased stiffness

Nylene High impact resistance PC/ABS alloy Designed to provide good moldability and a general purpose property profile Suitable for uses such as housings, enclosures, faceplates, covers, and other applications which require good dimensional stability and high impact resistance

Nylene 43% glass fiber reinforced PA 6,6/6 injection molding grade High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6. Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color UV for UV protection and UW for Weatherability.

Nylene High-flow unreinforced PBT injection molding resin Has the strength and resistance to heat, chemicals, and electricity typical of unreinforced polyester resins Suitable for uses such as connectors, housings, levers, and other applications which have long flow lengths or thin wall sections

Nylene PC/PBT alloy Combines the high impact resistance of polycarbonate with the improved chemical resistance of PBT High toughness and elongation values compared to typical crystalline resins Suitable for applications such as housings, covers, material handling components

Nylene General purpose polycarbonate injection molding grade High impact resistance and heat resistance typical of - Available in water white, blue tint, black, and pre-colored Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses

Nylene 45% glass fiber reinforced PBT specially formulated for improved surface appearance Has the high chemical and heat resistance of PBT combined with maximum stiffness Suitable for tool and appliance housings, levers, sunroof components and other uses which require high mechanical properties and good appearance

Nylene General purpose Economy grade Polycarbonate Retains good properties, at a beneficial cost / performance ratio Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses

General purpose poly(phenylene ether) (PPE) intended for injection molding This product is UL recognized

Nylene 10% glass fiber reinforced Polycarbonate Has improved stiffness over un-reinforced PC grades Suitable for applications such as housings, brackets, levers, and other uses that require toughness with increased stiffness

Nylon 6/12 molding resin with excellent flexibility and lower moisture absorption

Nylene General purpose polycarbonate produced from recycled feed-stocks Retains the high impact resistance and heat resistance of virgin polycarbonate while improving the cost / perfomance ratio Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses.

Nylene 20% flame-retardant mineral-reinforced PPE injection molding resin Has the inherent dimensional stability of PPE resins, while the addition of mineral reinforcement increases the strength and stiffness of finished parts Suitable for such uses as enclosures, housings, panels, and other applications where dimensional control and flame retardancy are desired

Nylene 33% glass fiber reinforced nylon 6/10 injection molding grade. Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10 Suitable for pump housings, inlet housings, fittings, and other uses where moisture pickup may be a concern

Nylene High-flow 15% glass fiber reinforced PBT polyester resin Has the high chemical and heat resistance of PBT combined with improved strength and stiffness Suitable for levers, electrical connectors, housings and other parts which have long flow lengths or thin wall sections

Nylene General purpose, UV stabilized polycarbonate molding resin Has the high impact resistance and heat resistance typical of polycarbonate, while adding a UV stabilizer package for improved weatherability Suitable for enclosures and housings, trim panels, and consumer items that may experience increased light exposure

Nylene Mineral-reinforced,heat-stabilized nylon 6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics, while having a very good surface appearance Suitable for such applications as housings, enclosures, stanchions, and engine covers

Nylene PC/PBT alloy Improved chemical resistance of PBT. B720 has high toughness and elongation values compared to typical crystalline resins Suitable for applications such as housings, covers, material handling components

Nylene 40% mineral-reinforced, heat-stabilized nylon 6/6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics Suitable for such applications as housings, enclosures, stanchions, and engine covers

Nylene 30% glass fiber reinforced Polycarbonate Has greatly improved stiffness over unreinforced PC grades Suitable for applications such as housings, brackets, levers, and other uses that require toughness with high stiffness

Nylene 40% mineral-reinforced, impact modified, heat-stabilized nylon 6/6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics, with slightly higher strength and stiffness than 6440. 6111 is suitable for such applications as housings, enclosures, stanchions, and engine covers

Nylene 36% mineral-reinforced, impact modified, heat-stabilized nylon 6/6 Used in applications where the dimensional stability and added stiffness are desired, but higher impact resistance is also needed Has the heat and chemical resistance typical of nylon 6/6 materials Ssuitable for housings and enclosures, brackets and fixtures, and other applications which require this unique set of properties

Nylene 30% glass fiber reinforced PBT specially formulated for improved surface appearance Has the high chemical and heat resistance of PBT combined with high strength and stiffness Suitable for tool and appliance housings, levers, sunroof components and other uses which require high mechanical properties and good appearance

Nylene 13% glass fiber reinforced, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene General purpose unreinforced nylon 6/10 injection molding grade Has heat and chemical resistance inherent in nylons, while also having the reduced moisture pick-up associated with nylon 6/10 Suitable for clips, bushings, housings, and other uses where moisture pickup may be a concern

Nylene 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene 15% glass-reinforced, flame retardant PBT resin Has improved strength and stiffness, with inherent heat resistance and electrical properties, combined with a flame retardant package Suitable for such applications as appliance and tool housings as well as electrical connectors and coil bobbins