Products

Nylene 33% glass fiber reinforced, heat stabilized nylon 6/6. Heat and chemical resistance inherent in nylon resins, while the glass fiber reinforcement gives greatly increased strength and stiffness. Suitable for such applications as brackets, levers, covers, and other uses where strength and stiffness are required. The ASTM line call out is D4066 PA012G33.

Nylene Heat stabilized nylon 6 copolymer for both extrusion and injection molding Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin

Nylene Heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility Approved for automotive use under Ford Motor Company specification ESA-M4D379-B and ASTM D4066 PA0161

Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Nylene NYLENE® BX3WQ662X is a standard viscosity, heat stabilized, special nylon polymer, made specificaly for wire jacketing. Provides excellent performance in applications that require a combination of toughness, abrasion resistance and chemical resistance. UL listed and meeting the requirements of UL 83 for wire jacketing.

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene Nylene NX1170 is a high viscosity, extrusion grade resin containing 5% molybdenum disulfide for improved wear resistance. The abrasion resistance of nylon 6 is enhanced by the addition of molysulfide. Because of its high melt viscosity, NX1170 can be extruded into rods, tubing, thin films, many complex shapes.

Nylene Toughened, heat-stabilized nylon 6/6 Exhibits an improved impact resistance and flexibility over unmodified nylons Retains the excellent chemical and heat resistance typical of all nylon products Suitable for applications such as clips, fasteners, safety restraint parts, and other parts with snap fit or clip features

Nylene Heat stabilized version of 406 which is a general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up. In addition to protection from heat degradation Parts molded from 409 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle

Nylene Nylene® 4214 HS is a Polyamide 6 (Nylon 6) material. It is available in North America for extrusion or injection molding.Important attributes of Nylene® 4214 HS are: Heat Resistant Good Flexibility Heat Stabilizer Impact Modified Impact Resistant

Nylene Specially formulated nylon powder for the ROTOMOLDING process For uses where HIGH IMPACT properties are required Heat stabilized Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying Strongly recommend the use of an inert gas such as nitrogen in the mold to minimize thermal degradation during processing

Nylene Unreinforced heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene 7212 HS BK is a heat-stabilized, mineral and glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties.

Nylene 15% glass fiber reinforced, impact modified, heat stabilized nylon 6 Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Heat stabilized, 5% glass fiber-reinforced nylon 6/6 with improved stiffness

Nylene Nylene NX1440 is a high viscosity, fast cycling molding resin. Crystallization initiators provide fast molding cycles through rapid melt set-up. Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon. Nylene NX1440 provides for an excellent balance between stiffness and toughness.

Nylene 7210 HS has a filler/reinf consisting of 28% GF/MR.

Nylene Nylene® 7115-41 HS is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America for extrusion or injection molding.Important attributes of Nylene® 7115-41 HS are: Heat Resistant Heat Stabilizer Impact Modified Impact Resistant

Nylene Heat-stabilized, UV stable nylon 6/6 homopolymer for use in injection molding processes Exhibits the same part toughness, wear resistance, heat and chemical resistance as standard nylon 6/6 grades while adding a UV resistance package to retain appearance under weathering conditions

Nylene 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6/6 Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments Suitable for applications such as brackets, housings, seating components, handles, and other similar uses

Nylene Nylene NX4004A HS BLACK is a heat stabilized, economy grade nylon for general purpose molding applications. In addition to protection from heat degradation, NX4004A HS BLACK has good flow characteristics at typical processing temperatures for nylon 6. Optimum processing conditions should provide a melt temperature of 450 - 470°F at the nozzle.

Nylene 43% glass fiber reinforced, heat stabilized, nylon 6 injection molding resin Heat and chemical resistance typical of nylon 6 resins, while glass fiber reinforcement provides outstanding strength and stiffness The nylon 6 base resin also provides excellent surface appearance Suitable for brackets, supports, enclosures, handles, and any other uses which require high stiffness along with good appearance

Nylene 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins Improved strength and stiffness properties over unreinforced nylon Suitable for uses such as handles and levers, brackets, housings and enclosures

Nylene General purpose un-reinforced, heat stabilized nylon 6 injection molding resin High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding

General purpose poly(phenylene ether) (PPE) with good heat stability for extrusion applications

Nylene Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene 40% mineral-reinforced, impact modified, heat-stabilized nylon 6/6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics, with slightly higher strength and stiffness than 6440. 6111 is suitable for such applications as housings, enclosures, stanchions, and engine covers

Nylene 14% glass fiber reinforced, impact modified, heat stabilized nylon 6/6 Improved strength and stiffness over un-reinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties

Nylene Standard viscosity, heat stabilized, special nylon polymer, made specificaly for wire jacketing. It Provides excellent performance in applications that require combination of toughness, abrasion resistance and chemical resistance. It is UL listed and meeting the requirements of UL 83 for wire jacketing

Nylene High viscosity heat-stabilized extrusion grade for film co-extrusion and blown film Excellent melt stability and good melt strength. Excellent chemical resistance, toughness, and resistance to abrasion

Nylene Specially formulated nylon powder for the ROTOMOLDING process, Heat stabilized, Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. It is strongly recommend the use of an inert gas such as nitrogen in the mold to minimize thermal degradation during processing.

Nylene Nylene® 7228 HS is a Polyamide 6 (Nylon 6) material filled with 28% glass\mineral. It is available in North America for extrusion or injection molding.Important attributes of Nylene® 7228 HS are: Heat Resistant Heat Stabilizer

Nylene Heat stabilized version of 721 which is a medium-impact modified nylon for fast, easy molding In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 724 have good impact strength right out of the mold without post conditioning Stiffness is near that of unmodified nylon 6 Barrel temperatures should be in the 450°F - 500°F range.

Nylene Mineral-reinforced,heat-stabilized nylon 6 injection molding grade Designed for maximum dimensional stability and high stiffness characteristics, while having a very good surface appearance Suitable for such applications as housings, enclosures, stanchions, and engine covers

A low viscosity, heat stabilized nylon 6 molding resin.