Products

Nylene Heat stabilized nylon 6 copolymer for both extrusion and injection molding Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin

Nylene Specially formulated nylon 6 molding resin possessing outstanding flow characteristics Ideally suited for applications requiring high flow properties and resistance to cracking Optimum processing conditions should provide a melt temperature of 450 - 470°F at nozzle

Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing.

Nylene Designed for use in extrusion of Tubing and Film Excellent grease resistance, toughness, and resistance to abrasion Films made from NX4797, have good barrier properties against Oxygen and Aroma typical of PA6 Meets FDA 21 CFR 177.1500 food contact requirements

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts

Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene Highly impact modified nylon 6 resin. PX1719 has very low stiffness for a nylon type resin Can be processed by either injection molding or extrusion Suitable for clips, fasteners, and also tubing and profiles, or any other uses where high impact resistance and maximum flexibility are required

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.

Nylene Nylene NX1170 is a high viscosity, extrusion grade resin containing 5% molybdenum disulfide for improved wear resistance. The abrasion resistance of nylon 6 is enhanced by the addition of molysulfide. Because of its high melt viscosity, NX1170 can be extruded into rods, tubing, thin films, many complex shapes.

Nylene Plasticized, high residual monomer resin designed for extrusion applications requiring excellent flexibility, high strength and good abrasion resistance Applications include flexible tubing, cable jacketing, and mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.

Nylene Nylene NX3024F is a medium viscosity nylon 6 resin suitable for general purpose molding applications. In addition to excellent melt stability and good melt strength, NX3024F has excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene NX3024F meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact. Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die.

Nylene Heat stabilized version of 733, which is a highly impact modified nylon suitable for both molding and extrusion In addition to heat stabilization to prevent thermal degradation, parts molded from 734 have excellent impact strength right out of the mold without post conditioning Outstanding features include high stiffness and high strength Cylinder temperatures should be in the 500-550°F range.

Nylene Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging. High melt strength for shape retention Like most PA6, Nylene 615 NP has excellent grease resistance, toughness, and resistance to abrasion.

Nylene Nylene® 4214 HS is a Polyamide 6 (Nylon 6) material. It is available in North America for extrusion or injection molding.Important attributes of Nylene® 4214 HS are: Heat Resistant Good Flexibility Heat Stabilizer Impact Modified Impact Resistant

Nucleated nylon 6 molding resin designed for faster molding cycle times and lower part shrinkage

Nylene Nylene NX1440 is a high viscosity, fast cycling molding resin. Crystallization initiators provide fast molding cycles through rapid melt set-up. Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon. Nylene NX1440 provides for an excellent balance between stiffness and toughness.

Nylene 7210 HS has a filler/reinf consisting of 28% GF/MR.

Nylene Nylene NX1731 is a general purpose grade nylon 6 resin which is suitable for molding or extrusion. It is recommended for industrial applications where the toughness, chemical resistance, and high temperature properties of nylon 6 are required but where some color variation is acceptable. Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die or nozzle.

Nylene High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die. (Available in black only)

Nylene High viscosity (200 RV), extrusion grade nylon 6/6 recommended for practically all types of extrusion including profile, film Has good melt flow and melt strength properties Optimum processing conditions should permit for a melt temperature of 550°F -575°F at the die

Nylene Nucleated extrusion grade suitable for cast and blown film Excellent melt stability and good melt strength, plus faster set-up for increased line speeds Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors

Nylene Nylene® 7115-41 HS is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America for extrusion or injection molding.Important attributes of Nylene® 7115-41 HS are: Heat Resistant Heat Stabilizer Impact Modified Impact Resistant

Nylene Copolymer of nylon 6 Has many of the properties desirable in nylon 6 such as toughness, chemical resistance and strength coupled with the advantages of a copolymer Advantages include high elongation, good clarity and flexibility, and lower processing temperatures Effective processing is achieved with extruder and die temperatures in the range of 450 - 525°F but may be processed as low as 420°F

Nylene Nylon 6,6/6 copolymer. Nylene PAC6-135 is suitable for use in extrusion, and film applications Has the heat and chemical resistance of nylon, with the lower crystallinity typical of type 6,6/6 grades Suitable for high clarity film

Nylene High-viscosity nucleated extrusion grade, suitable for film co-extrusion, cast and blown film Excellent melt stability and strength, faster set-up for increased line speeds Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Reduced coefficient of friction

Nylene Extrusion grade nylon 6 resin suitable for film co-extrusion applications and blown film Excellent melt stability and good melt strength Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21CFR 177.1500 for direct food contact

Nylene Nylene NX4702 is an anti-static, extrusion grade nylon 6 resin suitable for blown or cast film applications. It has excellent melt flow, melt strength properties, and optical clarity. Nylene NX4702 has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Optimum processing conditions should provide a melt temperature of 525 - 540°F at the die.

Nylene High viscosity, nucleated, nylon 6 extrusion grade resin Crystallization initiators provide rapid melt set-up in higher speed processing applications Optimum processing conditions should provide a melt temperature of 550 - 575°F at the die Nucleated

General purpose poly(phenylene ether) (PPE) with good heat stability for extrusion applications