Products

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

HBCD is particularly suited for providing flame retardant to expanded polystyrene (EPS) foam, extruded polystyrene foam (XPS) and textile back coatings that are used extensively in the building and construction industry. HBCD additives exhibit high efficiency at low use levels while making building insulation and textiles flame resistant.

FR-370 is an additive flame retardant developed for applications such as PP ,HIPS to reach class V‐2 according to the UL 94 standard, with outstanding UV and light stability. It is designed initially to provide an answer in the fast growing and developing field of PP, where the market was in need of a new more sophisticated flame retardant.The combination of both a high bromine content (70%) and phosphorous (3%) contributes to its excellent flame retardant efficiency.

AO 702 is an important phenolic antioxidant, which is mainly used for plastics, natural and synthetic rubber, and usually used as oils additives. With the excellent performance on high‐temperature antioxidation, it finds many applications in oil products serving under high temperature like heat conduction oil, quench oil and special lubricant.

Zinc Borate 35 is one multi‐functional synergistic flame retardant with Antimony Oxide etc additives in polymers to improve flame retardant performance, it can reduce smoke evolution and adjust the balance of flame retardant properties versus mechanical, electrical and other properties. Zinc Borate 35 is widely used in PVC applications such as carpet, conveyor belt, wire and cable, and in Nylon, PE, PP, epoxy, polyesters, thermoplastic elastomers and rubbers . plastics of halogen free flame retardant systems based on Al(OH)3 and Mg(OH)3, intumescent coating and painting, ceramic glaze, milk glass, decorative paper etc fields. Zinc Borate is also used in wood composite as fungicide to prevent from decay fungi and subterranean termites . ZB200 grade's particle size is the smallest, it is recommended to wire and cable applications that need much fine particle size fields.

DLTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyehylene, polyvinyl chloride, ABS rubber and lubricating oil. It can be used in combination with phenolic antioxidants to produce synergistic effect, and to prolong the life of the final products.

MPP is mainly used in PA and PBT, especially PA6, PA66, glass fiber‐reinforced PA6,PA66.Nylon containing .MPP can be used in all kind of injection and extrusion process and meet all kind of processing demands of polyamide, glass fiber polyamide.

TBP is a 2,4,6‐Tribromophenol that is is reactive and additive with good thermal stability. It was mainly used in epoxy resin and polyurethane etc.

AO 1076 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin，synthesize rubber and petroleum product, often used with DLTP for promoting the antioxidative effect.

DBDPE is used in high‐impact polystyrene,engineering plastics,wires and cables,insulator,elastomer and thermoset plastics etc. HIPS, PE, PP, ABS, PBT, UPE, Epoxy.

APP‐204 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with Silicon according to own method. APP‐204 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP‐204 mainly use in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber, Paint, coating.

DBDPO is a kind of broad‐spectrum,high efficiency fire retardant with the features of low additive quantity. It is widely used rubber,textile,electronic,plastic industry etc.Especially used in HIPS,PE,PP,ABS,PBT,UPE, Epoxy,Nylon6, Textiles etc.

AO 1098 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin and petroleum product, often used with DLTP for promoting the antioxidative effect.

TBNPA is a reactive flame retardant containing appox. 73% aliphatic bromine. It combines a high bromine content with exceptional stability and is particularly suitable where thermal. hydrolytic and light stability are required. Major uses of it are as a reactive intermediate for high molecular weight flame retardants, particularly in combination with phosphorus. and as a reactive flame retardant for polyurethanes where its high solubi1ity in the system makes it especially useful. It reacts through its single hydroxyl function to form pendant urethane groups. Its high bromine content and good compatibility in CFC‐free PU systems enables high standards of fire retardancy to be reached together with good foam properties in both rigid and flexible PU.

APP‐205 is a non‐halogenated flame retardant based on APP‐201 which develops its effectiveness through phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. APP‐205 differs in its mode of action from chlorineor bromine‐containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat‐insulating effect, reduces fur‐ther oxygen access and prevents dripping of the thermoplastic. APP‐205 may be used in poly‐propylene, PP‐copolymers and PP‐blends.

TPP is a non‐halogen flame retardant plasticizer for phenolic resin‐based, copper clad laminate, cellulose resin, vinyl resin and rubber, and some engineering plastics such as PPO.

AO B215 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

AO B225 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

FR-245 is a brominated cyanurate is a proprietary, additive flame retardant. The combination of aromatic bromine and cyanurate provides high FR efficiency and good thermal stability. A major use in ABS and HIPS. It combines good UV, impact and flow properties. It is non blooming.

DOPO is used in plastics for electronics, circuit board, linear polyester, polyamide, epoxy resina and polyurethane.

AO 2246 is a high‐efficiency nonpolluting Antioxidant , applicable to the manufacture of synthetic rubber, latex and natural rubber, being one of excellent phenol Antioxidants. It is applicable to light colored or colored rubber product. In plastic industry, this product can prevent the thermal aging and light aging of polyester chlornamee,polystyrene,ABS resin, polyoxymethylene and cellulose resin with the dosage of 0.5‐1%.

CEPPA is one kind of environment‐friendly fire retardant, it can be used permanent flame retarding modification of polyester, and the spinnability of flame retarding polyester is similar to PET, thus it can be used in all kinds of spinning system, with features as excellent thermal stability, no decompound during spinning and no smell. It can be used in all the application fields of PET to improve antistatic capacity of polyester. The dosage for copolymerization of PTA and EG is 2.5~4.5%, the phosphorus assay of flame retarding polyester sheet is 0.35‐0.60%, and the LOI of flame retarding products is 30~36%.

FR-680 is an outstanding flame retardant for HIPS, ABS, polycarbonate, thermoplastic, elastomers, unsaturated polyesters, adhesives, coatings, and textiles. And it is especially efficient for applications in which thermal stability at high processing temperatures is important.

APP‐201 is a fine‐particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

TBBA is mainly used for epoxy resin, polycarbonate polyester, phenol resin, polyurethane etc. also use for polystyrene, ABS,unsaturated polyester a flame ‐retardant‐additive.

TBPA is used in polyester, unsaturated polyester, epoxy resin, as a reactive flame‐retardant; used in polystyrene, polypropylene, polyethylene and ABS resin, as a additive flame retardant; used in various engineering plastics to resist burning based on its excellent thermal stability.

AO 1024 possesses the double structures of hindered phenol and acyl，and afunction of anti‐oxidation and metal deactivation. This product is a kind of metal deactivator, can be used either independently or together with antioxidant. It is applicable to polyethylene, polypropylene, polystyrene, polyamide, polyester, and especially to the antioxidant used in phenolic resin. It is effectively preventing the polymeric substance from self‐oxidation caused by transition metal ion (the remains of the catalyst). More efficient if it is added to the polymeric substance used in insulated electric wire and cable .The perfect melting nature makes it easily to mix withand into the substance mentioned above and other polymeric substance system without any dispersing problem. The general dosage is of 0.1‐0.5 share.

TBBP-DBPE is mainly used in PP, PE, PS and ABS.

BDDP is mainly used for plastics as flame‐retardant, widely for PP,PE,PS,ABS resin rubber fiber etc high molecular material and electronic industry. Especially for PP Plastics. It is the most excellent flame‐retardant for PP Plastics to now.

The product is a kind of high‐effective solid phosphite ester antioxidant, which is superior to other phosphite ester in the effective protection of polymers’ color.It is often blended with phenolic principal antioxidant (such as 1010) to prepare com‐posite antioxidant which improves the thermo‐stability of polymer processing, thus making it widely applied in PE, PP, PS, PA, PC, ABS and many other polymer materials.

APP‐202 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with melamine resin according to own method. APP‐202 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

AO 3114 is a kind of tri‐function group phenolic antioxidant, without pollution and coloring up. Dependent on high molecular weight and melting point, it has low volatility, low transferring, and good water extraction resistance, while equips plastics with resistance to thermo‐oxidation and light‐oxidation. 3114 suits for PE, PP, PS, ABS, nylon, PVC, PU, cellulose and synthetic rubber, especially effective for polyolefin. When used with UV absorbent and phosphite ester, a synergistic effect can be reached, thus enhancing the thermo‐stability and light stability.

DSTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyethylene,polyvinyl chloride, ABS rubber and lubricating oil. It has high‐melting and low‐volatility .It can be used in combination with phenolic antioxidants and ultraviolet absorbers to produce synergistic effect.

TBE is a reactive flame‐retardant, mainly used in foamed polystyrene, unsaturated polyester, foamed polyester and the like to resist burning, also used together with Hexabromocyclododecane, having a synergistic effect.

MCA is a Melamine Cyanurate is a halogen‐free flame retardant for polyamide.Steadable color, good electrical property and environmentally friendly, Melamine Cyanurate has established itself as the flame retardant to achieve UL 94 V‐0 especially for polyamide 6 and 6,6. Addition of MCA gives PA6(66) good mechanical and electrical properties.