Products

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

HBCD is particularly suited for providing flame retardant to expanded polystyrene (EPS) foam, extruded polystyrene foam (XPS) and textile back coatings that are used extensively in the building and construction industry. HBCD additives exhibit high efficiency at low use levels while making building insulation and textiles flame resistant.

APP‐205 is a non‐halogenated flame retardant based on APP‐201 which develops its effectiveness through phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. APP‐205 differs in its mode of action from chlorineor bromine‐containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat‐insulating effect, reduces fur‐ther oxygen access and prevents dripping of the thermoplastic. APP‐205 may be used in poly‐propylene, PP‐copolymers and PP‐blends.

Zinc Borate 35 is one multi‐functional synergistic flame retardant with Antimony Oxide etc additives in polymers to improve flame retardant performance, it can reduce smoke evolution and adjust the balance of flame retardant properties versus mechanical, electrical and other properties. Zinc Borate 35 is widely used in PVC applications such as carpet, conveyor belt, wire and cable, and in Nylon, PE, PP, epoxy, polyesters, thermoplastic elastomers and rubbers . plastics of halogen free flame retardant systems based on Al(OH)3 and Mg(OH)3, intumescent coating and painting, ceramic glaze, milk glass, decorative paper etc fields. Zinc Borate is also used in wood composite as fungicide to prevent from decay fungi and subterranean termites . ZB200 grade's particle size is the smallest, it is recommended to wire and cable applications that need much fine particle size fields.

DBDPE is used in high‐impact polystyrene,engineering plastics,wires and cables,insulator,elastomer and thermoset plastics etc. HIPS, PE, PP, ABS, PBT, UPE, Epoxy.

APP‐204 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with Silicon according to own method. APP‐204 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP‐204 mainly use in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber, Paint, coating.

APP‐203 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with melamine resin according to own method. APP‐203 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. It is completely insoluble in organic solvents. APP 203 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

FR-370 is an additive flame retardant developed for applications such as PP ,HIPS to reach class V‐2 according to the UL 94 standard, with outstanding UV and light stability. It is designed initially to provide an answer in the fast growing and developing field of PP, where the market was in need of a new more sophisticated flame retardant.The combination of both a high bromine content (70%) and phosphorous (3%) contributes to its excellent flame retardant efficiency.

AO 1024 possesses the double structures of hindered phenol and acyl，and afunction of anti‐oxidation and metal deactivation. This product is a kind of metal deactivator, can be used either independently or together with antioxidant. It is applicable to polyethylene, polypropylene, polystyrene, polyamide, polyester, and especially to the antioxidant used in phenolic resin. It is effectively preventing the polymeric substance from self‐oxidation caused by transition metal ion (the remains of the catalyst). More efficient if it is added to the polymeric substance used in insulated electric wire and cable .The perfect melting nature makes it easily to mix withand into the substance mentioned above and other polymeric substance system without any dispersing problem. The general dosage is of 0.1‐0.5 share.

BDDP is mainly used for plastics as flame‐retardant, widely for PP,PE,PS,ABS resin rubber fiber etc high molecular material and electronic industry. Especially for PP Plastics. It is the most excellent flame‐retardant for PP Plastics to now.

TBPA is used in polyester, unsaturated polyester, epoxy resin, as a reactive flame‐retardant; used in polystyrene, polypropylene, polyethylene and ABS resin, as a additive flame retardant; used in various engineering plastics to resist burning based on its excellent thermal stability.

TPP is a non‐halogen flame retardant plasticizer for phenolic resin‐based, copper clad laminate, cellulose resin, vinyl resin and rubber, and some engineering plastics such as PPO.

MCA is a Melamine Cyanurate is a halogen‐free flame retardant for polyamide.Steadable color, good electrical property and environmentally friendly, Melamine Cyanurate has established itself as the flame retardant to achieve UL 94 V‐0 especially for polyamide 6 and 6,6. Addition of MCA gives PA6(66) good mechanical and electrical properties.

PX220 is a powder type halogen‐free phosphate ester flame retardant, whose superiority is demonstrated in good processibility, unique self‐extinguishing flame retardant properties and good compatibility. It is recommended for use in PC, PC/ABS, PPO/HIPS and ABS.

Antioxidant 697 is a sterically hindered phenolic antioxidant and metal deactivator. Antioxidant 697 protects polymers against oxidative degradation and metal catalyzed degradation during processing and in end‐use applications. This antioxidant also provides long term thermal stabilization properties. This phenolic antioxidant is an excellent, non‐discoloring, non‐staining antioxidant and thermal stabilizer with outstanding metal deactivation properties. Typical end use applications include wire and cable insulation, film and sheet manufacture as well as automotive parts. Antioxidant 697 will stabilize polypropylene, polyethylene, polystyrene, polyester, EPDM, EVA and ABS. Low volatility ,Strong synergistic effect with phosphites, other phenols and thioesters, Non‐staining and non‐discoloring,FDA approved for adhesives and polymers.

TBP is a 2,4,6‐Tribromophenol that is is reactive and additive with good thermal stability. It was mainly used in epoxy resin and polyurethane etc.

TBE is a reactive flame‐retardant, mainly used in foamed polystyrene, unsaturated polyester, foamed polyester and the like to resist burning, also used together with Hexabromocyclododecane, having a synergistic effect.

CEPPA is one kind of environment‐friendly fire retardant, it can be used permanent flame retarding modification of polyester, and the spinnability of flame retarding polyester is similar to PET, thus it can be used in all kinds of spinning system, with features as excellent thermal stability, no decompound during spinning and no smell. It can be used in all the application fields of PET to improve antistatic capacity of polyester. The dosage for copolymerization of PTA and EG is 2.5~4.5%, the phosphorus assay of flame retarding polyester sheet is 0.35‐0.60%, and the LOI of flame retarding products is 30~36%.

FR-245 is a brominated cyanurate is a proprietary, additive flame retardant. The combination of aromatic bromine and cyanurate provides high FR efficiency and good thermal stability. A major use in ABS and HIPS. It combines good UV, impact and flow properties. It is non blooming.

TBNPA is a reactive flame retardant containing appox. 73% aliphatic bromine. It combines a high bromine content with exceptional stability and is particularly suitable where thermal. hydrolytic and light stability are required. Major uses of it are as a reactive intermediate for high molecular weight flame retardants, particularly in combination with phosphorus. and as a reactive flame retardant for polyurethanes where its high solubi1ity in the system makes it especially useful. It reacts through its single hydroxyl function to form pendant urethane groups. Its high bromine content and good compatibility in CFC‐free PU systems enables high standards of fire retardancy to be reached together with good foam properties in both rigid and flexible PU.

APP‐202 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with melamine resin according to own method. APP‐202 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

DBDPO is a kind of broad‐spectrum,high efficiency fire retardant with the features of low additive quantity. It is widely used rubber,textile,electronic,plastic industry etc.Especially used in HIPS,PE,PP,ABS,PBT,UPE, Epoxy,Nylon6, Textiles etc.

TBBA is mainly used for epoxy resin, polycarbonate polyester, phenol resin, polyurethane etc. also use for polystyrene, ABS,unsaturated polyester a flame ‐retardant‐additive.

APP‐201 is a fine‐particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.