Products

HBCD is particularly suited for providing flame retardant to expanded polystyrene (EPS) foam, extruded polystyrene foam (XPS) and textile back coatings that are used extensively in the building and construction industry. HBCD additives exhibit high efficiency at low use levels while making building insulation and textiles flame resistant.

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

APP‐201 is a fine‐particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

LS 622 is a hindered amine light stabilizer. It is used in light aging inhibition of polyethylene, polypropylene, polyurethane, metaformaldehyde, polyamine and polyester, also in ABS and engineering plastics.

BDDP is mainly used for plastics as flame‐retardant, widely for PP,PE,PS,ABS resin rubber fiber etc high molecular material and electronic industry. Especially for PP Plastics. It is the most excellent flame‐retardant for PP Plastics to now.

DBDPE is used in high‐impact polystyrene,engineering plastics,wires and cables,insulator,elastomer and thermoset plastics etc. HIPS, PE, PP, ABS, PBT, UPE, Epoxy.

AO 1098 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin and petroleum product, often used with DLTP for promoting the antioxidative effect.

Antioxidant 697 is a sterically hindered phenolic antioxidant and metal deactivator. Antioxidant 697 protects polymers against oxidative degradation and metal catalyzed degradation during processing and in end‐use applications. This antioxidant also provides long term thermal stabilization properties. This phenolic antioxidant is an excellent, non‐discoloring, non‐staining antioxidant and thermal stabilizer with outstanding metal deactivation properties. Typical end use applications include wire and cable insulation, film and sheet manufacture as well as automotive parts. Antioxidant 697 will stabilize polypropylene, polyethylene, polystyrene, polyester, EPDM, EVA and ABS. Low volatility ,Strong synergistic effect with phosphites, other phenols and thioesters, Non‐staining and non‐discoloring,FDA approved for adhesives and polymers.

AO 1010 is that a kind of pluralism is obstructed the phenol type and resisted oxygen pharmaceutical, have very good compatibility with most polymer. There is good function of changing color of preventing the light and heat from causing. Used PE, PP, PS, polyamide, polyformaldehyde, ABS resin, PVC, synthetic rubber, etc. in the high polymer material extensively. Used for preventing the hot oxygen of the oil and coating from wearing out too.

DLTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyehylene, polyvinyl chloride, ABS rubber and lubricating oil. It can be used in combination with phenolic antioxidants to produce synergistic effect, and to prolong the life of the final products.

TBNPA is a reactive flame retardant containing appox. 73% aliphatic bromine. It combines a high bromine content with exceptional stability and is particularly suitable where thermal. hydrolytic and light stability are required. Major uses of it are as a reactive intermediate for high molecular weight flame retardants, particularly in combination with phosphorus. and as a reactive flame retardant for polyurethanes where its high solubi1ity in the system makes it especially useful. It reacts through its single hydroxyl function to form pendant urethane groups. Its high bromine content and good compatibility in CFC‐free PU systems enables high standards of fire retardancy to be reached together with good foam properties in both rigid and flexible PU.

LS‐783 areas of application include polyolefin (PP, PE), polyurethane, polyfomaldehyde, polyamide and polyester and polyester with elastomers. And it can be used in engineering plastic suchad ABS When be used in Iow concentration agricultural film system (LDPE or LLDPE), it delivers excellent cost/perfomance benefits.

TBE is a reactive flame‐retardant, mainly used in foamed polystyrene, unsaturated polyester, foamed polyester and the like to resist burning, also used together with Hexabromocyclododecane, having a synergistic effect.

FR-245 is a brominated cyanurate is a proprietary, additive flame retardant. The combination of aromatic bromine and cyanurate provides high FR efficiency and good thermal stability. A major use in ABS and HIPS. It combines good UV, impact and flow properties. It is non blooming.

APP‐202 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with melamine resin according to own method. APP‐202 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP 201 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

AO B215 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

APP‐205 is a non‐halogenated flame retardant based on APP‐201 which develops its effectiveness through phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. APP‐205 differs in its mode of action from chlorineor bromine‐containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat‐insulating effect, reduces fur‐ther oxygen access and prevents dripping of the thermoplastic. APP‐205 may be used in poly‐propylene, PP‐copolymers and PP‐blends.

TBBP-DBPE is mainly used in PP, PE, PS and ABS.

AO 1024 possesses the double structures of hindered phenol and acyl，and afunction of anti‐oxidation and metal deactivation. This product is a kind of metal deactivator, can be used either independently or together with antioxidant. It is applicable to polyethylene, polypropylene, polystyrene, polyamide, polyester, and especially to the antioxidant used in phenolic resin. It is effectively preventing the polymeric substance from self‐oxidation caused by transition metal ion (the remains of the catalyst). More efficient if it is added to the polymeric substance used in insulated electric wire and cable .The perfect melting nature makes it easily to mix withand into the substance mentioned above and other polymeric substance system without any dispersing problem. The general dosage is of 0.1‐0.5 share.

DSTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyethylene,polyvinyl chloride, ABS rubber and lubricating oil. It has high‐melting and low‐volatility .It can be used in combination with phenolic antioxidants and ultraviolet absorbers to produce synergistic effect.

CEPPA is one kind of environment‐friendly fire retardant, it can be used permanent flame retarding modification of polyester, and the spinnability of flame retarding polyester is similar to PET, thus it can be used in all kinds of spinning system, with features as excellent thermal stability, no decompound during spinning and no smell. It can be used in all the application fields of PET to improve antistatic capacity of polyester. The dosage for copolymerization of PTA and EG is 2.5~4.5%, the phosphorus assay of flame retarding polyester sheet is 0.35‐0.60%, and the LOI of flame retarding products is 30~36%.

Light stabilizer 791 is a synergistic mixture of Light stabilizer 944 and Light stabilizer 770. It is an excellent UV stabilizer especially for PP thick sections, which offers excellent surface protection. It also shows high stabilization efficiency in PP tapes. Light stabilizer 791 areas of application are PP, PP/EPDM and PP/PE/EPDM blend (TPO’s). Light stabilizer 791 is an excellent UV stabilizer for thick sections.The synergism between the high and low molecular weight HALS components of Light stabilizer 791guarantees maximum protection for the polymer against degradation from UV radiation and long‐term heat exposure.

LS 770 is recommended to be used in polypropylene, impact modified PP(TPO),EPDM, polystyrene ,impact polystyrene ABS,SAN,ASA and polyurethanes and is also effective in polyamides and polyacetals. LS 770 is a low molecular weight hindered amine light stabilizer that provides excellent light stability for thick sections and films in the recommended substrates. Benefits of using LS770 is the high light‐stabilizing performance, particularly in PP thick sections. It has broad compatibility and can be easily dispersed. The recommended concentrations range between 0.1% and 0.5%,depending on the substrate, processing conditions and application. The optimum level is substrate and application specific. Extensive performance data of LS 770 in various substrates and for various applications is available upon request.

LS 944 is one kind of high molecular Lighl stabilizer, with multiple functional groups .It can be used in low density PE film, PP tape, EVA film, ABS, PP fiber PE, polyacetals ,polyamides,polyurethanes, PVC, PVC blending material, polystyrene, rubber and viscose, It can work with uv adsorbent because its special structutre and large molecular weight(3000).It also can be used in film and fiber.also can be used as antioxidant and heat stabilizer of polymer, The dosage of agricultural film is 0.2%.

TBPA is used in polyester, unsaturated polyester, epoxy resin, as a reactive flame‐retardant; used in polystyrene, polypropylene, polyethylene and ABS resin, as a additive flame retardant; used in various engineering plastics to resist burning based on its excellent thermal stability.

MPP is mainly used in PA and PBT, especially PA6, PA66, glass fiber‐reinforced PA6,PA66.Nylon containing .MPP can be used in all kind of injection and extrusion process and meet all kind of processing demands of polyamide, glass fiber polyamide.

AO 702 is an important phenolic antioxidant, which is mainly used for plastics, natural and synthetic rubber, and usually used as oils additives. With the excellent performance on high‐temperature antioxidation, it finds many applications in oil products serving under high temperature like heat conduction oil, quench oil and special lubricant.

AO 3114 is a kind of tri‐function group phenolic antioxidant, without pollution and coloring up. Dependent on high molecular weight and melting point, it has low volatility, low transferring, and good water extraction resistance, while equips plastics with resistance to thermo‐oxidation and light‐oxidation. 3114 suits for PE, PP, PS, ABS, nylon, PVC, PU, cellulose and synthetic rubber, especially effective for polyolefin. When used with UV absorbent and phosphite ester, a synergistic effect can be reached, thus enhancing the thermo‐stability and light stability.

APP‐204 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with Silicon according to own method. APP‐204 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. APP‐204 mainly use in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber, Paint, coating.

APP‐203 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from APP‐201 by micro‐encapsulation with melamine resin according to own method. APP‐203 is a fine‐particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non‐hygroscopic and non‐flammable. It is completely insoluble in organic solvents. APP 203 is used in Plastic(PP,PE,PA,PVC,PBT),PU, Rubber ,Paint and coating.

The product is a kind of high‐effective solid phosphite ester antioxidant, which is superior to other phosphite ester in the effective protection of polymers’ color.It is often blended with phenolic principal antioxidant (such as 1010) to prepare com‐posite antioxidant which improves the thermo‐stability of polymer processing, thus making it widely applied in PE, PP, PS, PA, PC, ABS and many other polymer materials.

AO B225 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

FR-680 is an outstanding flame retardant for HIPS, ABS, polycarbonate, thermoplastic, elastomers, unsaturated polyesters, adhesives, coatings, and textiles. And it is especially efficient for applications in which thermal stability at high processing temperatures is important.

DBDPO is a kind of broad‐spectrum,high efficiency fire retardant with the features of low additive quantity. It is widely used rubber,textile,electronic,plastic industry etc.Especially used in HIPS,PE,PP,ABS,PBT,UPE, Epoxy,Nylon6, Textiles etc.

FR-370 is an additive flame retardant developed for applications such as PP ,HIPS to reach class V‐2 according to the UL 94 standard, with outstanding UV and light stability. It is designed initially to provide an answer in the fast growing and developing field of PP, where the market was in need of a new more sophisticated flame retardant.The combination of both a high bromine content (70%) and phosphorous (3%) contributes to its excellent flame retardant efficiency.