Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
- Composition
ACTIVE INGREDIENT: Triflumizole 1-[1-[[4-chloro-2-(trifluoromethyl) phenyl] imino]-2- propoxyethyl]-1H-imidazole 42.14% OTHER INGREDIENTS 57.86% TOTAL 100.0% Contains 4 lb triflumizole per gallon.
Features & Benefits
- Agrochemicals Features
- Product Highlights
Terraguard SC is a 42.14% flowable formulation of the active ingredient Triflumizole
- Common Name: Triflumizole
- Class: Imidazole \
RESTRICTED ENTRY INTERVAL (REI) AND SIGNAL WORD
- REI = 12 hours
- Signal Word = CAUTION
- Key Diseases Controlled
- Rhizoctonia
- Thielaviopsis
- Cylindrocladium
- Powdery Mildew
- Rusts
- Leaf Spots
- Scab
- Fusarium Wilt
- Product Info
TERRAGUARD SC® fungicide is effective in controlling a variety of diseases on ornamental plants, greenhouse grown vegetables (tomato and cucumber) and specified fruit for trees/ vines (apple, pear and grape) that will not bear fruit for a minimum of 12 months.
TERRAGUARD SC can be used in the following areas:
- Greenhouses and shadehouses
- Nurseries, and Christmas tree / conifer plantations
- Interiorscapes
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Fungicide Target Species
- Mode Of Action
Terraguard SC works by inhibiting sterol synthesis. Optimal performance is obtained as a preventative application. Terraguard SC can also be applied after disease symptoms appear and provide good eradicant control.
- Use Sites
Terraguard SC may be used on ornamental plants, greenhouse-grown vegetables, and on non-bearing fruit trees and shrubs grown in commercial greenhouses, shadehouses, interiorscapes, and nurseries including Christmas tree and conifer plantations.
- Application Rates
Terraguard SC may be applied as a spray, drench, cutting soak or through chemigation equipment.
Apply 2- 8 -16 fluid ounces per 100 gallons depending on disease and application method. See label for specific instructions.
- Tank Mixing
The Terraguard SC user is advised to conduct a small scale test for any tank mix compatibility with other products before using on a large scale.
- Directions For Use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read entire label directions before using. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation
- Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: Coveralls; chemical-resistant gloves made of any waterproof material; and shoes plus socks.
- Non-Agricultural Use Requirements
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. Keep unprotected persons out of treated areas until sprays have dried.
- Application Information
TERRAGUARD SC provides excellent protectant activity and is most effective when applied prior to the onset of disease following specified rates. When not used in preventative programs, TERRAGUARD SC can also be applied after disease symptoms appear and provide good eradicant activity. Applications can be made via foliar spray, soil drench, cutting soak and chemigation, using high and low volume hand guns, overhead booms / sprinklers and backpack spray applicators.
ORNAMENTALS AND NON-BEARING FRUIT TREES/SHRUBS
FOLIAR SPRAYS: The specified rate of application is 0.5 to 1 gallon of spray mixture to cover 200 sq ft of area or 100 to 200 gallons per acre. Required spray volumes will vary greatly depending on both the size and spacing of the plant, and should only be enough to ensure thorough coverage of the foliage just prior to the point of drip.
SOIL DRENCHES: Apply the specified rate of TERRAGUARD SC according to the guidelines below. The application should be made to plants which have been well watered one day prior to application. For best results, irrigation with additional water should not be made until 24 hours after application.
Restrictions:
- In Nassau and Suffolk Counties of New York, soil drench application is limited to container grown ornamentals only.
- Do not apply TERRAGUARD SC as a soil drench to field grown or outdoor grown ornamentals in Nassau and Suffolk Counties.
Safety & Health
- Personal Protective Equipment (Ppe)
- long sleeved shirt and long pants
- chemical-resistant gloves made of any waterproof material
- shoes plus socks
- Precautionary Statements
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION Harmful if swallowed. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or the toilet.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemical-resistant to this product are listed below. Applicators and Other Handlers Must Wear: A longsleeved shirt and long pants; chemical-resistant gloves made of any waterproof material; shoes plus socks.
USER SAFETY REQUIREMENTS
Follow manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
ENGINEERING CONTROLS
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS
- User Safety Recommendations
- Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
- Environmental Hazards
This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not contaminate water when cleaning equipment or disposing of equipment washwaters or rinsate. Drift and runoff from treated areas may be hazardous to aquatic organisms in neighboring areas.
PHYSICAL or CHEMICAL HAZARDS Do not use or store near heat or open flame.
Packaging & Availability
- Packaging Type
- Packaging
- 1 quart bottle, 12 per case
Storage & Handling
- Storage And Disposal
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE: Store in a cool, dry, secure location.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
CONTAINER HANDLING: Nonrefillable container. Do not reuse or refill this container. For containers equal to or less than 5 gallons in size: Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer container for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, by incineration or if allowed by State and local authorities, by burning. If burned, stay out of smoke.
Recycling: Once cleaned, some agricultural plastic pesticide containers can be taken to a container collection site or picked up for recycling. To find the nearest site, contact your chemical dealer or manufacturer or contact the Ag Container Recycling Council (ACRC) at 1-877-952-2272 (toll free) or visit www.acrecycle.org.