company tower banner
Old Bridge Chemicals, Inc. Company Logo

Old Bridge Chemicals Zinc Sulfate Monohydrate (ZnSO4 . H2O) (Feed/Fertilizer Grade – Low Heavy Metal (Low HM))

Old Bridge Chemicals Zinc Sulfate Monohydrate is a highly concentrated, 100% soluble material containing no zinc chlorides or oxides. Upon dissolving the material will leave little to no residue, unlike most other commercially available products. This product is available in powder, mini-granular and granular form.

Ingredient Name: Zinc Sulfate Monohydrate

Functions: Corrosion Inhibitor, Fertilizer, Micronutrient, Mineral Source

CAS Number: 7446-19-7

Chemical Family: Minerals, Zinc & Zinc Compounds

Labeling Claims: Non-Carcinogenic, Not Listed In California Proposition 65, Organic, Residues-free

Certifications & Compliance: AFIA International Safe Feed/Safe Food, Comprehensive Environmental Response, Compensations & Liability Act (CERCLA), FAMI-QS, NSF Approved, OMRI

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

Applications & Uses

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Arsenic Content**max. 0.00020%-
Cadmium Contentmax. 0.00070%-
Dioxins/ PCBsTesting upon request--
Iron Contentmax. 0.40000%-
Lead Contentmax. 0.00050%-
Mercury Content **max. 0.00010%-
Nickel Contentmax. 0.00150%-
Sulfur Content17.5%-
Zinc Content35.5%-
Note

** Above analysis is a guide to minimum/maximum levels for each component.
**verified by an independent outside lab to their ICP detection levels.

The typical properties listed are intended as a guide and are affected by the raw materials used to manufacture the product. Please contact us if you need additional information, or if you have a specific requirement.

Regulatory & Compliance

Safety & Health

Environmental Hazards

Zinc Sulfate is toxic to fish and aquatic organisms. If product is spilled, comply with Federal, State, and local regulations on reporting spills. Refer to Old Bridge Chemicals Safety Data Sheet and labels for further details.

Safe Handling

Zinc Sulfate is acidic and causes severe eye irritation. It may be irritating to the skin and may cause sensitization reactions in certain individuals. Avoid breathing the dust as it may be irritating to the upper respiratory tract. Contact with eyes and skin should be avoided using safety goggles and rubber gloves. In case of eye contact, immediately flush eyes with plenty of water for 15 minutes and call a physician. If Zinc Sulfate is ingested, call a physician. Contaminated clothing should be thoroughly washed before reuse. Refer to Old Bridge Chemicals Safety Data Sheet entitled "Zinc Sulfate Monohydrate."

Packaging & Availability

Packaging Type
Packaging Information

The Product is packaged in 50 lb. multi-walled bags, 25 kg multi-walled bags, 2,000 lb. Super Sacks or 1,000 kg Super Sack. Please contact us for special packaging or railcar shipping requests.

Sizing Available
Powder

-325 to +325 Mesh

Mini-granular -16 to +20 Mesh
Granular -5 to +8 Mesh

Storage & Handling

Storage

Zinc Sulfate should be stored in a cool, dry place. Keep containers closed. Solutions of Zinc Sulfate should be stored in tanks fabricated of Type 316 Stainless Steel, rubber-lined steel tanks or plastic tanks.

Shipping Information

Not regulated in packages < 1000 lbs.

For packages ≥ 1000lbs: DOT Hazard Class: UN3077, Environmentally Hazardous Substance, Solid, NOS (zinc sulfate) 9, PGIII, RQ, ERG171, NMFC 047410-01 FRT CL 55.