company tower banner
Old Bridge Chemicals, Inc. Company Logo

Old Bridge Chemicals Zinc Sulfate Monohydrate (ZnSO4·H2O) (Powder - Technical Grade)

Old Bridge Chemicals Zinc Sulfate Monohydrate, Powder, Technical Grade is a highly concentrated, 100% soluble material containing no zinc chlorides or oxides. Upon dissolving the material will leave little to no residue, unlike most other commercially available products.

Chemical Name: Zinc Sulfate

Functions: Corrosion Inhibitor, Fertilizer, Micronutrient

Chemical Family: Zinc & Zinc Compounds

Grade: Technical Grade

Labeling Claims: Non-Carcinogenic, Not Listed In California Proposition 65, Residues-free, Zinc Oxide-free

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

Properties

Physical Form
Appearance
Free Flowing White Powder
Typical Properties
ValueUnitsTest Method / Conditions
Screen Analyses (+325 mesh)90%-
Screen Analyses ( -325 mesh)10%-
Screen Analyses ( +200 mesh)55%-
Screen Analyses (+100 mesh)22%-
Chemical Analysis
ValueUnitsTest Method / Conditions
Arsenic Content**max. 2ppm-
Cadmium Contentmax. 5ppm-
Copper Contentmax. 5ppm-
Iron Contentmax. 15ppm-
Lead Contentmax. 2ppm-
Mercury Content **max. 2ppm-
Nickel Contentmax. 5ppm-
Zinc Contentmin. 35.3%-
Note

** Above analysis is a guide to minimum/maximum levels for each component.
**verified by an independent outside lab to their ICP detection levels.

The typical properties listed above are intended as a guide and are affected by the raw materials used to manufacture the product. Please contact us if you need additional information, or if you have a specific requirement.

Regulatory & Compliance

Safety & Health

Environmental Hazards

Zinc Sulfate is toxic to fish and aquatic organisms. If the product is spilled, comply with Federal, State and local regulations on reporting spills. Refer to Old Bridge Chemicals’ Material Safety Sheet for further details.

Safe Handling

The product is acidic and causes severe eye irritation. It may be irritating to the skin and may cause sensitization reactions in certain individuals. Avoid breathing the dust as it may be irritating to the upper respiratory tract. Contact with eyes and skin should be avoided through the use of safety goggles and rubber gloves. In case of eye contact, immediately flush eyes with plenty of water for 15 minutes and call a physician. If Copper Sulfate is ingested, give large amounts of milk or water. Call a physician. Contaminated clothing should be thoroughly washed before reuse. Refer to Old Bridge Material Safety Data Sheet entitled "Zinc Sulfate Monohydrate."

Packaging & Availability

Packaging Type
Packaging Information

The Product is packaged in 50 pound multi-wall bags, 2,000 lb. Super Sacks, or 1,000 kg Super Sacks.

Storage & Handling

Storage

Zinc Sulfate Monohydrate should be stored in a cool, dry place. Avoid storing in damp or wet areas.

Shipping Information

DOT Hazard Class: UN3077, Environmentally Hazardous Substance, Solid, NOS (zinc sulfate) 9, PGIII, RQ, ERG171, NMFC047410-01 FRT CL 55.