Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Benefits
- Extra high yield: 55 LITERS. This allows doing more work with one canister: 20 linear meters (equivalent to 4 windows of 5 m.l.).
- Long lifetime: 18 months.
- Adheres well to most building materials like wood, concrete, stone, plaster, metal, PVC and polystyrene.
- Suitable for use in higher temperatures, up to +40°C.
- Excellent thermal insulation. Reducing the impact of thermal bridges.
- High acoustic attenuation (62 dB).
- No shrinkage after curing. Stable foam dimensions.
- Low curing pressure and moderate post expansion avoid deformation of building elements.
- Can be painted or coated when fully cured.
- Ready to use. Fast and easy-to-use application.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Fields of Applications
Olive PU-45 Mega is used for various building applications:
- Installation of doors and windows frames.
- Insulation and fixation of tubes.
- Filling of holes and gaps.
- Fixation of wall panels and roof stones.
- Thermal and acoustic insulation in general.
- Suitable for narrow and moving joints.
- Direction for Use
Application Conditions
Air temperature during use between +5°C and +40°C, best results at +20°C. Recommended can temperature during application between +5C and +35C, best results at +20"C. At low temperatures foam can must be warmed before work in warm room or water. Temperature of room or water must not exceed +30°C.
Application Instructions
Substrates must be clean from ice, dust, oil, loose particles and grease. Substrates should be moistened as the foam expands due to the moisture. A moistened surface ensures better results. (if no moisture is available, foam will collapse into itself as it cures).
Protect eyes and wear gloves and working clothes. Protect with paper or plastic all surrounding areas.
Shake the can vigorously at least 20 times. Hold the foam can in upright position. Turn the gunto the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed to other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun trigger.
Half fill the cavity and spray lightly the foam with water. The foam will expand to fill the rest. When applying foam in layers moisten slightly between each layer.
When fixing window frames, hold the frame in place for approximately 24 hours until the foam is fully cured. Cured foam can be painted with water-based paints.
Cleaning
Uncured foam can be cleaned from tools and sufaces with OLIVE R-47. Cured foam can be removed mechanically.Remarks
Unsuitable for fire protection.
There is no adhesion to PE, PP, PTFE (Teflon®) and silicones. Due to the wide variety of possible substrates, we recommenda preliminary compatibility test. Cured foam is sensitive to UV-light and direct sunlight (it will discolor) and therefore must be covered with suitable opaque sealant, filler, paint or other material.
Properties
- Color
- Physical Form
- Mechanical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength/Elongation (Dry surfaces) | min. 85(16) | kpa% | TM 1018 |
Tensile Strength/Elongation (Moistened Surfaces) | min. 95(13) | kpa% | TM 1018 |
Value | Units | Test Method / Conditions | |
Tack Free Time | 6-10 s | minutes | TM 1014 |
Cutting Time | max. 30 | Minutes | TM 1005 |
Completely cured in joint (3x5 cm, 23°C) | max. 8 | h | — |
Curing Pressure (Moistened Surfaces) | max. 2 | kPa | TM 1009 |
Post Expansion | max. 80 | % | TM 1010 |
Density (in joint,3x10 cm) | 2022-12-16 | Kg/m3 | WGM106 |
Dimensional Stability | max. 2 | % | TM 1004 |
Fire class of cured foam | B3 | — | DIN 4102-1 |
Compression Strength (Moistened Surfaces) | min. 25 | kPa | TM 1011 |
Shear Strength (Moistened Surfaces) | min. 35 | kPa | TM 1012 |
Thermal Conductivity | 0.033 | W/(m·K) | EN 12667, TM 1020 |
Sound Reduction Index (Rstw) | 62 dB | — | EN ISO 10140 |
Water Vapour Permeability | max. 0.06 | mg/(m·h·Pa) | EN 12086 |
Foam Yield in joint (3x5 cm, per 750 ml filling rate) | 20.0 | Minutes | WGM107 |
Foam Yield (per 750 ml filling rate) | 55.0 | L | TM 1003 |
Application Temperature | 5-40 | ºC | — |
Can Temperature | 5-35 | ºC | — |
Temperature Resistance of Cured Foam | 50-90 | ºC | — |
Regulatory & Compliance
- Environmental Regulations
- French vOC-emission class A+.
- EMICODE® EC 1 Plus- very low emission.
- Emission class M1.
Safety & Health
- Safety
Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. The product contains flammable propellants. Protect from overheating and keep away from ignitions sources. Do not smoke during work.
Dangerous when inhaled. May cause sensitisation by inhalation and skin contact. Ensure sufficient ventilation during application. Use protective gear when necessary. Keep out of the reach of children. Cured foam can be handled without any danger to health.
The information regarding the safety of the product is available on safety data sheet (SDS). Before using the product, we recommend to read carefully the SDS and the safety labels.
Packaging & Availability
- Packaging Type
- Packaging Information
- 1000 ml aerosol can, content 750 ml,
- 12 pcs in a box.
- 70-box European pallets (840 aerosol can)
Storage & Handling
- Storage
- The cans must be stored and transported in vertical position.
- Store in a cool and dry place at temperatures between +5°C and +30°C.
- The foam cans must not be stored above +50 C, in the viciníty of heat sources or in direct sun light. Guaranteed storage time in unopened package is 18 months. The 'Best Before' date is shown on the pack.