Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Basis
- Unsaturated Polyester Styrene Free
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
- Good bond strength with high load resistance.
- Fast working times for early loading in time sensitive applications.
- Use in damp & wet environments and fixing holes.
- Chemical resistance.
- Used with ll grades of threaded rod
- Extremely versatile in masonry, hollow, aerated concrete.
- Styrene free with low odor. No styrene allows for use indoors and in enclosed spaces.
- Crack and gap filling repairs in concrete vertical or horizontal.
- Close edge distance and small spacing.
- Quick, easy, economical and extremely durable fixing resin.
Applications & Uses
- Markets
- Application Method
- OLIVE TQ-10s is Used as
Resistant, durable and secure chemical anchoring resin system for metal fixings (threaded rods, studs, screws, hooks and rebars in construction) to structural elements: concrete, cement, bricks, stone, rock and other high strength materials, in both vertical and horizontal applications. Particularly suitable product for anchoring systems in wet environments or with chemical exposure.
- Direction for Use
Installation Instruction for Concrete or Solid Masonry
- Drill the hole with the correct diameter and depth using a rotary percussive machine. Check the perpendicularity of the hole during the driling operation.
- Clean the hole from drilling dust, core fragments, oil, water, grease and other contaminants prior to mortar injection with manual blower and steel bristles manual brush.
- The hole shall be cleaned by at least 4 blowing operations, by at least 4 brushing operations followed by at least 4 blowing operations.
- Before brushing, clean the brush and check if the brush diameter is sufficient. The threaded rod should be free of dirt, grease, oil or other foreign material.Made sure the mixing element is inside the mixer and insert the cartridge in the disperser gun.
- Before starting to use a new cartridge discard the first swings of the product. Discard the first 10ml of resin until an even color is achieved.
- Fill the drilled hole uniformly starting from the drilled hole bottom, in order to avoid trapping of air remove the mixer slowly bit by bit during pressing-Out.
Filling the drill hole with a quantity of the injection mortar corresponding to 2/3 of the drill hole depth. - Insert immediately the threaded rod slowly and with a slight twisting motion, removing excess of injection mortar around the threaded rod.
- Wait the curing time. Do not move or load the anchor until is fully cured.
Installation instruction for hollow/perforated masonry
- Drill the hole with the correct diameter and depth using the appropriate drill. Check the perpendicularity of the hole during the drilling operation.
- Clean the hole from drilling dust, core fragments, oil, water, grease and other contaminants prior to mortar injection (with manual blower and standard manual brush).
- Introduce the correct sized sleeve. Remove the centering cap from the plastic sleeve. Insert in the hole the plastic sleeve.
- Unscrew the front cup of the cartridge and tightly attach de mixing nozzle.
- Made sure the mixing element is inside the mixer and insert the cartridge in the disperser gun.
- Before starting to use a new cartridge discard the first swings of the product. Discard the first 10ml of resin until an even color is achieved.
- Fill the sleeve uniformly starting from the bottom; remove the mixer slowly bit by bit during pressing-out: remove the mixer about 10 mm for each pressing operation. Filling the sleeve completely.
- Put on the centering cup on the filled plastic sleeve.
- Insert immediately the threaded rod, slowly and with a slight twisting motion, removing excess of injection mortar around the threaded rod. Observe the
processing time. - Wait the curing time. Do not move or load the anchor until is fully cured.
Properties
- Color
- Physical Properties
- Mechanical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | approx. 1.71 | g/ml | IS0 2811-1 |
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 2803.0 | N/mm2 | EN ISO 178 |
| Flexural Strength | 15.9 | N/mm2 | EN ISO 178 |
| Tensile Strength | 9.3 | N/mm2 | EN ISO 527 |
| Modulus of Elasticity | 4874.5 | N/mm2 | EN ISO 527 |
| Value | Units | Test Method / Conditions | |
| Compressive Strength | 43.5 | N/mm2 | EN ISO 604 |
| VOC Emissions | A+ Rating | — | — |
Regulatory & Compliance
- Product Certifications
OLIVE TQ-10s meets the following specifications:
- ETA 20/0507-EAD 330499-00-0601 bonded injection type anchor for use
- in non-cracked concrete: sizes M8 to M16.
- Environmental Regulations
- French VOC-emission class A+.
- Conforms to LEED® IEQ-credits 4.1 (Indoor Environmental Quality) adhesives and sealants.
Technical Details & Test Data
- Technical Data
Typical Tensile Performance- Standard Embedment Depth Concrete. C20/25. 5.8 Grade Studding Size Recommended Load (kN) Spacing (Scr,N) Drill Hole Ø Fixing Hole Ø Setting Depth Tension(Nrec) Shear(Vrec) (mm) (mm) (mm) (mm) M8 6.93 5.14 160 10 9 80 M10 8.7 8.57 200 12 12 90 M12 12 12 240 14 14 110 M16 17.25 22.29 320 18 18 125 M20 27.23 34.86 400 24 22 170 M24 34.03 50.29 450 28 26 210 M30 47.12 81.43 520 35 32 280
Packaging & Availability
- Packaging Type
- Packaging Information
This product is available in 410ml and 300ml cartridges (12u/Box).
Storage & Handling
- Storage
The shelf life is 18 months in its unopened original packaging, in dry conditions and protected from direct sunlight at temperatures between +5ºC and +25ºC.