Products

POLYCHEM 7060-V-60 is an acrylic-vinyl toluene modified alkyd combining the fast dry properties of VT alkyds with improved durability.

POLYCHEM 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

Polychem G801‐238‐X‐66 is a glyptal short oil non‐drying alkyd. It has excellent compatibility and adequate hardness. It also has a very high color retention and good flexibility.

POLYCHEM 2390-M-80 is a high solids long soya alkyd with good compatibility and adhesion. Can be used as a blending resin to achieve lower VOC. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

Polychem G7758-MS16-60 is a general purpose air drying enamel vehicle with maximum resistance to yellowing on aging and exposure to kitchen fumes.

POLYCHEM® 5200-M-80 is a long oil urethane-modified alkyd resin with moderate viscosity and low hazardous air pollutants (HAP) content, allowing for HAP-free coatings (below 1% HAP). Tailored for marine paints, wood, and parquet varnishes, it ensures fast drying, high gloss, hardness, and excellent weather resistance.

Polychem 7655-KD-75 is a high solids VT oil reduced in narrow cut mineral spirits.

POLYCHEM G2505 is a long oil Soya alkyd. It is a general-purpose gloss air dry enamel with excellent resistance to yellowing on aging and exposure to kitchen fumes.

POLYCHEM G2507 is a general purpose gloss air drying enamel vehicle with excellent resistance to yellowing on aging. This resin is designed for use in enamels where low V.O.C. is required.

Polychem 7774-EB-85 is a HAP’s free high solid, chain-stopped water reducible alkyd. It has excellent flow and leveling properties and has designed for low VOC baking enamels (below 150 g/l). It can provide excellent hardness, adhesion and gloss along with good corrosion protection.

POLYCHEM 7517-M-75 is a high solids medium oil alkyd for use in air dry / forced dry systems. Brush enamels or primers with VOC levels of 340 - 400 grams/liter can be formulated. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).