Products

POLYCHEM 7060-V-60 is an acrylic-vinyl toluene modified alkyd combining the fast dry properties of VT alkyds with improved durability.

POLYCHEM 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

POLYCHEM 7605-K-80 is a short oil soya based chain stopped alkyd cut to 80% in methyl propyl ketone. 7605 is a HAPS Free version of 7212. It is useful in air dry, force dry or bake enamels, and is designed to have flexibility and adhesion. It dries in heavy films comparable to a conventional solids short to medium alkyd.

POLYCHEM 2390-M-80 is a high solids long soya alkyd with good compatibility and adhesion. Can be used as a blending resin to achieve lower VOC. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

POLYCHEM 7577-KD-65 is a VT modified Linseed oil in a narrow cut aliphatic hydrocarbon, providing a flash point of greater than 100 F, but at the same time allowing for faster dry than standard mineral spirits cuts.

POLYCHEM G2505 is a long oil Soya alkyd. It is a general-purpose gloss air dry enamel with excellent resistance to yellowing on aging and exposure to kitchen fumes.

POLYCHEM 7563-V-60 vinyl toluene copolymer is designed for use in primers, enamels, aerosols, and sanding sealers where lacquer type dry is required. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

POLYCHEM 7482-PMA-90 solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

POLYCHEM 7517-M-75 is a high solids medium oil alkyd for use in air dry / forced dry systems. Brush enamels or primers with VOC levels of 340 - 400 grams/liter can be formulated. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

POLYCHEM G2507 is a general purpose gloss air drying enamel vehicle with excellent resistance to yellowing on aging. This resin is designed for use in enamels where low V.O.C. is required.