Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Key Performance Properties
-
Optical
-
Mechanical
-
Thermal
-
Electrical
-
Properties
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Optical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.2 | — | ASTM D-792 |
| Area Factor | 160.0 | ft2 / lb / mil | ASTM D-590 |
| Water Absorption (Equilibrium) | 0.32 | % | ASTM D-570 |
| Rockwell Hardness | 118.0 | R Scale | ASTM D-785 |
| Pencil Hardness | B | Scratch Hardness | ASTM D-3363 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength, Break | 10500.0 | psi | ASTM D-638 |
| Tensile Strength, Yield | 8700.0 | psi | ASTM D-638 |
| Tensile Elongation, Break | 150.0 | % | ASTM D-638 |
| Tensile Modulus of Elasticity | 350000.0 | psi | ASTM D-638 |
| Tear Strength, Initial | 1.4 - 1.8 | lb / mil | ASTM D-1004 |
| Tear Strength, Propagation | 30 - 55 | g / mil | ASTM D-1922 |
| Burst Strength1 | 40 - 45 | Mullen, psi | ASTM D-774 |
| Fold Endurance2 | 200.0 | Double Folds | M.I.T |
| Impact Strength, Gardner3 | 120.0 | in lbs | ASTM D-5420 |
| Value | Units | Test Method / Conditions | |
| Deflection Temperature under Flexural Load (264 psi) | 288.0 | °F | ASTM D-648 |
| Tensile Heat Distortion (50 psi) | 302.0 | °F | ASTM D-1637 |
| Specific Heat Capacity (77° F) | 0.3 | BTU / (lb °F) | ASTM D-351 |
| Thermal Conductivity | 1.35 | BTU / (hr) (ft2) (°F/in) | ASTM D-177 |
| Coefficient of Thermal Expansion | 38 x 10-6 | in / in / °F | ASTM D-696 |
| Strain Relief (275° F) | <0.2 | % | ASTM D-1204 |
| Brittleness Temperature | -211.0 | °F | ASTM D-746 |
| Vicat Softening Temperature | 305.0 | °F | ASTM D-1525 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength (72°F in oil, short time2) | 1700.0 | V / mil | ASTM D-149 |
| Dielectric Constant (60 Hz /1 MHz) | 3.00 / 3.00 | — | ASTM D-150 |
| Dielectric Factor (60 Hz/1 Mhz) | 0.001 / 0.002 | — | ASTM D-150 |
| Volume Resistivity | 10¹⁷ | Ω-cm | ASTM D-257 |
| Surface Resistivity | 10¹⁵ | Ω-cm2 | ASTM D-257 |
| Value | Units | Test Method / Conditions | |
| Refractive Index | 1.586 | ND | ASTM D-542 |
| Light Transmission | 89.0 | % | ASTM D-1003 |
| Haze4 | 0.5 | % | ASTM D-1003 |
| Yellowness Index | max. 1.0 | — | ASTM D-1925 |
Technical Details & Test Data
- Technical Data
Thickness Range 0.002” – 0.030” Surface Textures Gloss/Gloss*
Velvet/Matte
Velvet/Gloss
Matte/GlossMaster Roll Lengths up to 2,000 yards (dependent on thickness)
Custom roll lengths availableWidths 48.5” – 63”
Custom slit widths availableSheets 24.5” x 48.5” sheets
48.5” x 96.5” sheets
Custom trimmed and squared sheets available* Standard protective masking configuration (0.005” - 0.007” is cling/cling and 0.010” - 0.030” is stick/cling).