Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Surface Area
It is available in a variety of textures. Common uses include backlit panels, membrane switches, nameplates, labels and decals.
- Application Area
It is easily printed, die-cut, embossed, thermoformed and hot stamped. RowTec® film delivers the clarity, dimensional stability and impact resistance properties you demand.
Properties
- Flame Rating
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Optical Properties
- Flammability
- Foot Notes
(1) Value for 0,025 mm film
(2) Value for 0,762 mm film
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1,32 | g / cm3 | ASTM D-792 |
| Water Absorption (24 hours) | 0,28 | % | ASTM D-570 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength, Break 1 | 60.0 | MPa | ASTM D-882 |
| Tensile Strength, Yield 1 | 70.0 | MPa | ASTM D-882 |
| Tensile Elongation, Break 1 | 130.0 | % | ASTM D-882 |
| Tensile Modulus of Elasticity 1 | 2.2 | MPa | ASTM D-882 |
| Tear Strength, Initial 1 | 0,3 | N/μm | ASTM D-1004 |
| Tear Strength, Propagation 1 | 2.0 | g /μm | ASTM D-1922 |
| Impact Strength, Gardner 2 | 28.0 | J | ASTM D-5420 |
| Value | Units | Test Method / Conditions | |
| Deflection Temperature under Flexural Load (1.8 MPa) | 142.0 | °C | ASTM D-648 |
| Specific Heat Capacity (25 °C) | 1,26 | J/g/°C | ASTM E-1269 |
| Thermal Conductivity | 0,20 | W/m °C | ASTM D-5470 |
| Coefficient of Thermal Expansion | 5.8 x 10-5 | cm / cm / °C | ASTM E-831 |
| Glass Transition Temperature | 152.0 | % | ASTM D-3418 |
| Brittleness Temperature | -135.0 | °C | ASTM D-746 |
| Vicat Softening Temperature | 160.0 | °C | ASTM D-1525 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength (22°C in oil, short time 1) | 590.0 | kV/cm | ASTM D-149 |
| Dielectric Constant (60 Hz /1 MHz) | 2,9 / 2,8 | — | ASTM D-150 |
| Dissipation Factor (60 Hz /1 MHz) | 0,0026 / 1,17 | — | ASTM D-150 |
| Volume Resistivity | 10¹⁷ | Ω-cm | ASTM D-257 |
| Surface Resistivity | 10¹⁵ | Ω-cm2 | ASTM D-257 |
| Arc Resistance, Tungsten Electrodes | 62.0 | sec | ASTM D-495 |
| Value | Units | Test Method / Conditions | |
| Refractive Index (25°C) | 1,60 | ND | ASTM D-542 |
| Light Transmission 1 | 89.0 | % | ASTM D-1003 |
| Yellowness Index 1 | max. 1 | — | ASTM D-1925 |
| Value | Units | Test Method / Conditions | |
| Flammability Classification (clear 125 - 250) | VTM-2 | μm | UL 94 |
Regulatory & Compliance
- Certifications & Compliance