Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Recommendation for Laminating
Parts by weight:
Ocpol 711 100 Catalyst K 10 2 ml - Applications
- To start the curing reaction, take 100 parts of resin.
- Catalyst K 10 should be added to the resin system shortly before application to initiate the polymerization reaction.
- It is important to add the catalyst in carefully measured amounts to control the polymerization. Too much catalyst will cause too rapid a gelation time, whereas too little catalyst will result in under cure.
- Care must be taken to avoid explosive violence. Do not mix catalyst and cobalt octate or any accelerator together.
Properties
- Physical Form
- Appearance
- Cloudy
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity at 25°C | 400 - 500 | cps | Brookfield LVT sp. 3@60 rpm |
| Gel Time at 25°C | 12 – 18 | min | — |
| Acid value | max. 26 | mg KOH/g | — |
| Solid content | 58±2 | % | — |
| Specific Gravity at 25°C | 1.11 – 1.13 | — | — |
| Peak Temperature | min. 170 | — | — |
| Heat deflection temperature | 63 - 71 | °C | — |
| Water absorption 24 h at 23°C | 16 - 19 | mg | — |
| Elongation at break at 20°C | 1.9 – 2.2 | % | — |
| Tensile strength | 55 – 65 | Mpa | — |
| Tensile modulus | 3600 - 3800 | Mpa | — |
| Flexural Strength | 182 - 195 | Mpa | — |
Safety & Health
- Safety
Due attention should be given to the precautions for handling chemicals provided in our Material Safety Data Sheet.
Packaging & Availability
- Packaging Type
- Packing
Ocpol 711 is supplied in 220 Kg new steel drums with close top.