Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- HRAC/WSSA Group
- Agrochemical Functions
- Technologies
- Product Families
Features & Benefits
- General Information
Corral is a selective pre-emergence herbicide for the control of certain grasses in maize, sweetcorn, soyabeans and various vegetable crops.
Ingredients: Corral contains 480 g/liter of alachlor as the active ingredient, and up to 515 g/liter of monochlorobenzene as a solvent. .
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- Spillage
Extinguish any ignition sources. Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in a waste container. Wash area with water and detergent, and absorb with further inert material. Dispose of safely to a suitable landfill.
- Directions For Use
It is an offense for users of this product to cause residues exceeding the relevant MRL in the Food Notice: Maximum Residue Levels for Agricultural Compounds.
- Application Methods
Use conventional boom spraying equipment fitted with fan tip nozzles. Use a spray pressure of 200 - 280 kPa and a water rate of 200 - 400 liters per hectare. Flush out spray equipment thoroughly following use. Use detergent in water then finally flush with clean water.
- Rainfall
Up to 13mm of rain or irrigation is required within 10 days of application to activate the herbicide.
- Surface Blending
If soils are very dry and rain is not expected within 10 days, surface blend to a depth of 25 - 50mm using a roller tiller or similar type equipment at a speed of not less than 10kph soon after application.
- Resistance Management
GROUP K3 HERBICIDE
Corral is a member of the chloroacetamide chemical family. Resistance to this and other chloroacetamide or oxyacetamide herbicides could develop from excessive use. To minimize this risk, use strictly in accordance with label instructions and rotate use with herbicides with a different mode of action. Consult http://resistance.nzpps.org/index.php for alternative modes of action and details of resistance management strategies (if any) for the crops listed on this label.
Weeds Crop Rate per Hectare Critical Comments Annual Poa, Barnyard grass, Black nightshade, Bristle grass, Crowfoot grass, Fathen, Redroot, Summer grass and Witchgrass Cucurbits, squash and pumpkins 2 - 4 liters in 200 - 400 liters of water/ha Use the higher rate on soils high in organic matter or clay content. Crop injury may result from higher rates on light textured soils, shallow seeding or heavy rain immediately after application. Do not surface blend. Kumara 4 liters in 200 - 400 liters of water/ha Apply immediately after planting. Maize Sweetcorn 7 liters in 200 - 400 liters of water/ha Alternatively use 5.5 - 7 liters plus 2 - 3.5 liters of atrazine 500 g/L, eg, Assett™. The higher rate should be used on soils high in clay or organic matter. The addition of Assett will extend the spectrum of weeds controlled. Do not apply after the crop has emerged as injury may result. Onions 3 - 5 liters in 200 - 400 liters of water/ha Apply after the crop has two true leaves and prior to emergence of grass weeds. Use the higher rate on soils high in organic matter or clay content. Soyabeans 7 liters in 200 - 400 liters of water/ha Apply immediately after sowing. If willow weed is expected use 6 liters plus 2kg Linuron 500g/kg per hectare. On soils high in peat or clay, use 7.5 liters, plus 3 kg Linuron 500 g/kg per hectare. Vegetable brassicas – Brussel sprouts and cauliflower transplants. 6 liters in 200 - 400 liters of water/ha Apply immediately after transplanting.
Properties
- Formulation Type
Technical Details & Test Data
- Compatibility
Compatible with most commonly used herbicides.
Safety & Health
- Precautions
APPROVED HANDLER: This product must be under the control of an approved handler during use. STORAGE: Keep out of reach of children. Do not store near heat, flame or other source of ignition. Store in the original, tightly closed container, in a secure and well ventilated area away from foodstuffs. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of vapor or spray mist. When mixing or applying, wear overalls, chemical resistant boots and gloves, eye protection and respirator (organic vapor and particulate matter). Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Avoid handling, mixing or use of the product or container near heat, flame or other source of ignition. Apply with well maintained and calibrated spray equipment. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Do not burn. Triple rinse container and add rinsate to the spray tank. Dispose of container to a suitable landfill or agricultural recycling scheme. Do not burn. Do not use container for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or empty container. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur.
Packaging & Availability
- Packaging Type