Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- INCI Name
- Ingredient Origin
- Agrochemical Functions
- Base Chemicals Functions
- Cosmetic Ingredients Functions
- CAS No.
- 25322-68-3
- EC No.
- 500-038-2
- Product Families
Features & Benefits
- Benefit Claims
Applications & Uses
- Applications
- Bath & Shower Applications
- Color Cosmetic Applications
- Fragrances & Perfume Applications
- Hair Care Applications
- Home Care Applications
- I&I Cleaning Applications
- Skin Care Applications
- Recommended Uses
Market Application Function Agrochemical Emulsifiable concentrate Solvent Agrochemical Soluble concentrate Adjuvant Ceramic Ceramic bodies Plasticizer, promotes green resistance Ceramic Serigraphy Lubricant, binding agent, vehicle for serigraphy & thixotropic agent Leathers General Raw material for esterification of fatty acids that provide emulsifying, softening, lubricating, humectant & antistatic properties Lubricants General Thermal resistance agent, Lubricating agent Environment Pollutant emission control Absorption of chlorates, phenols and aromatics Paper Gravure paper Humectant, plasticizer Paper Cardboard/packaging & toilet paper Softening agent Polyurethanes General Chain-extender for Polyols Paints General Humectant, Rheology agent, Solvent Treatment Of Metals Printed circuit Weld anti-splash agent Textile General Raw material for esterification of fatty acids to obtain products with emulsifying, softening, lubricating, humectants & antistatic properties Personal Care Bath oils Solubilizer Personal Care Creams and lotions moisturizers Vehicle, Humectant, Perfume fixative Personal Care Products for makeup (lipsticks, shadows, foundations) Solubilizer, Humectant Personal Care Cream without rinsing for hair Conditioner agent, Consistency agent Personal Care Shampoos Viscosity regulator, Conditioner agent Personal Care Hair for spray Antistatic agent Personal Care Fragrances Fixative
Properties
- Physical Form
- Soluble in
- Water
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Acid Number | max. 0.5 | mgKOH/g | — |
| Ash Content | max. 0.1 | % | — |
| Hydroxyl Number | 535-590 | mgKOH/g | — |
| Molecular Weight (Average) | 190-210 | — | — |
| Water Content | max. 1 | % | CLI - WATER |
| pH Value | 4.5 - 7.5 | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory Clearances
The products in the ULTRAPEG® line are used in U.S. Personal Care products under their INCI names as found in the Cosmetic Ingredient Handbook. They can also be used as indirect food contact ingredients in accordance with the Food and Drug Administration - FDA.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage And Handling
- The products in the ULTRAPEG line have low toxicity levels and are readily biodegradable. Use proper personal protective equipment (PPE) when handling the products, such as PVC gloves, safety goggles, and coat.
- In case of accidental contact, proceed as follows:
- eyes: wash immediately with abundant water for at least 15 minutes;
- skin: remove the contaminated clothing and wash the affected sites with abundant water;
- ingestion: seek urgent medical care.
- Store these products in sealed containers, in a sheltered, dry place, away from sources of heat or ignition. Because these products are hygroscopic, we recommend storing them on cement floors at low humidity. Handle chemical products in well-ventilated areas, with ready access to emergency showers and eyewash stations.
- The products in the ULTRAPEG® line are considered non-flammable. When heated to temperatures above their flash point, decomposition may occur. In case of actual fire, please consult the appropriate MSDS.
- ULTRAPEG® 200 is low-viscosity liquids at temperatures above 5ºC. For bulk storage of products in the ULTRAPEG® line with molecular weights of 600 or more, use tanks made of AISI 304 or 316 stainless steel or carbon steel coated with vinyl ester resin. These tanks should have internal coils made of 304 or 316 stainless steel installed at the bottom and provided with hot water at temperatures of 70 to 80ºC. Steam is not recommended as product may darken at high heat. In addition, a recirculation system is recommended to homogenize the product before use
- To handle products in the ULTRAPEG® line with molecular weights over 600, packaged in drums, we recommend heating in ovens, water baths or with thermal tapes at temperatures of 60°C to 80°C for only as long as it takes to melt and homogenize the products before use.